Solution for 2019 Grand Design Reflection 28BH Sitting 6 Lower Than 2017 Super Duty

Updated 04/08/2020 | Published 04/06/2020

Question:

i have a 2019 reflection 28bh grand design fifth wheel. the tow vehicle is a 2017 f 350 super duty 4x4, the problem is i am 6 inches high in the front of the 5er, the hitch is at its lowest setting in the bed and the pin box is at its lowest setting. i thank the easiest solution would be to add a 3 inch lift kit on the 5th wheel correct ? also do you see a problem with being 3 inches high after the the kit was installed?? what do you recommend as far as lift kits for this particular 5th wheel?

asked by: Chris H

Expert Reply:

Thank you for the information and photos!

Normally we recommend using an over-under kit to move your axles from above your leaf springs to under them, but since your axles are already in this position you can either use the 2-1/4" Lift Kit # RR23QX or you'll have to replace your current hangers with tall ones to get your rig sitting any higher. You ultimately should be okay being out of level by 3" - 4" but anything more than that would cause issues.

I would just go with the lift kit simply because it's easier to install as there is no welding required.

expert reply by: Jon G