Dimensions of the Parts Included in the Dutton Lainson Miter Gear Kit # DL22439
Updated 07/12/2012 | Published 07/11/2012
Question:
Hello A friend of mine just bought an old truck camper and one of the jacks has a bad miter gear set. there are no markings at all on the jacks at all. im having a difficult time finding replacement gears as im sure you know they are all prapriataory. I thought maybe you could help. I have the gears out. Hear are the measurements. outside diameter 1.188inch 1-3/16 bore diameter .508inch 1/2 thickness .539 mounting hight .898inch approximately single keyway on back of gear .170inch wide for 1/8inch roll pin there is a slight bevel on the back side of the gear that measures approximately .830inch though it probably isnt required. 16 teeth. Any help you could provide would be great.
asked by: Mark V
Expert Reply:
Without the manufacturer name and model number of the jacks on your truck camper it will be difficult at best to determine the correct replacement parts for the jacks.
I pulled this part from stock and attached a photo showing all of the dimensions of the Miter Gear Kit, # DL22439, that you referenced. This kit only has 12 teeth and would not work for your jack that requires 16 teeth on the gears.
We have several kits that have gears with 16 teeth, but the .539 thickness of your gears is thicker than anything we currently stock. I attached a link to all of the gears that we currently stock for you to check out.
Unfortunately, without more information, your best bet might be to go with a new jack for your truck camper.
Product Page this Question was Asked From
Replacement Miter Gear Kit for Dutton-Lainson Trailer Jacks - 1,250 - 2,000 lbs. (1996 and Newer)
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Motor and Gear Parts
- Gears
- Dutton-Lainson
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Replacement Miter Gear Kit for Dutton-Lainson Trailer Jacks - 1,250 - 2,000 lbs. (1996 and Newer)
- Search Results: tongue jacks
- Video: All About the Replacement Miter Gear Kit for Dutton-Lainson Trailer Jacks
- Search Results: bevel gear kit
- Search Results: 195354
- Search Results: bulldog
- Q&A: Replacement Parts for the Dutton-Lainson Sidewind Swivel Trailer Jack # DL22800
- Q&A: Replacement Parts for Dutton Lainson Trailer Jack
- Q&A: How to Install the Bulldog Replacement Sidewind Handle and Gear Kit
- Video: Complete Breakdown of the Dutton-Lainson Trailer Jack w/ Footplate
- Video: Review of etrailer Replacement Sidewind Handle - TJA-2000S-HD
- Video: Hands-On with the Replacement Bearing for etrailer and Ram Square Jacks
- Shop: Dutton-Lainson Trailer Jack w/ Footplate - Sidewind - Fixed Mount - 15" Lift - 2,500 lbs
- Shop: Thule Xscape Bed Rail Mounting Kit
- Shop: Replacement Sidewind Handle for etrailer and Ram 2,000-lb A-Frame Jacks
- Shop: Replacement Sidewind Gear Kit for etrailer and Ram Square, Direct Weld Jacks - 5,000 or 7,000 lbs
- Shop: Replacement Sidewind Handle Assembly for etrailer and Ram Square, Direct Weld Jacks - 7,000 lbs
- Shop: Replacement Miter Gear Kit for Dutton-Lainson Trailer Jacks - 600 - 1,000 lbs. (1996 - 1997)
- Video: Review of etrailer Trailer Jack - Square Direct Weld Jack - e32ZV
- Q&A: Replacement Gear Kit DL22439 For Dutton-Lainson Boat Jack
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Article: How to Measure for Trailer Hitch Drop
- Search Results: trailer wiring
on Accessories and Parts
