Can the CE Smith Guide-Ons for Pontoon Boat Trailers Be Installed In the Middle of the Trailer

Question

Question:

Any reason these guides can not be used towards the center rear before the engine I have wide lifting strakes then narrowing tubes aft. Thanks

asked by: Marty D

0

Expert Reply:

The CE Smith Roller Style Guide-Ons for Pontoon Boat Trailers part # CE27672 can be installed at the rear of the trailer or towards the center. That said, the further back they are installed the better they will do to help guide the boat on.

I have attached a photo of the above guide-ons installed both at the rear and center of the trailer for reference.

expert reply by: Conner L

0

click to enlarge

Answer 1

One pair of guide-ons like the CE Smith #CE27672 should be sufficient as the V-shaped bunks should guide the pontoons in the rest of the way onto the trailer and keep everything properly aligned. If you click the provided link, you can see a video of…

view full answer...

Answer 2

The great thing about boat trailers is that everybody tends to have a different setup and the amount of CE Smith Roller Style Guide-Ons for Pontoon Boat Trailers #CE27672 you need really boils down to what you plan on having on your trailer. If you…

view full answer...

Answer 3

Though we do not have an option that would have a perfect 90 degree angle, I may still have something that would work. The CE Smith #CE27610 is a little smaller and typically installed on the outside of a trailer frame, but can be used however…

view full answer...

Answer 4

As you will be loading and unloading in the stronger river current I recommend using the CE Smith Roller Style Guide-Ons for Pontoon Boat Trailers #CE27672. These use rollers that will allow for your pontoon to load easier onto your boat trailer.…

view full answer...

Answer 5

The pontoon trailer guide-ons only come in a set of 2 as that is all that is needed, although you can add more if you believe that it is necessary. That all just depends on how confident you are about staying on the right track once you have started…

view full answer...

Answer 6

I have another option for you, but the CE Smith Bunk-Style Guide-Ons for Boat Trailers - 60" Long - 1 Pair #CE27600 you were looking at are designed for standard boats and not Tritoons. Instead I recommend the CE Smith Bunk Style Guide-Ons for…

view full answer...

Answer 7

We do offer a variety of pontoon boat trailer guide-on and roller products that you can see by clicking on the link provided. I reviewed photos of Tracker Trailstar pontoon boat trailers and noted some are equipped with post-style guide-ons like…

view full answer...

Answer 8

The CE Smith Roller Style Guide-Ons for Pontoon Boat Trailers #CE27672 can pretty easily be used on a tritoon pontoon like what you have.

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Can the CE Smith Guide-Ons for Pontoon Boat Trailers Be Installed In the Middle of the Trailer

Product Page this Question was Asked From

Continue Researching