No Drill Class III Trailer Hitch Fit for 2019 Ford Edge SEL

Published 02/21/2020

Products Featured in This Question

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

(340)

$211.51

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(38)

$77.95

1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs

(2621)

$12.45

2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs

(1358)

$12.90

Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 9-1/4" Long - 7,500 lbs

(3838)

$36.58

Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span

(895)

$13.90

Question:

Hi, Just wanted to verify before purchase that this will work for 2019 Ford Edge SEL.. I had to check with a local instal... Pep Boys, to see if they could install, they would but wont do it if there is extra drilling involved,,, everything has to match, pre-existing holes., so Im just making sure. Thank you,

asked by: Yvonne W

Expert Reply:

According to Draw-Tite, the # 75234 Class III hitch is a fit for all models of the 2019 Ford Edge with the exception of the Titanium model. This is a no-drill installation, but one small stud on the underside of the vehicle above the muffler will need to be cut off using a Dremel tool or die grinder. I've linked you to the installation instructions and an installation video showing the hitch being installed on a 2018 Edge.

If you'll be towing with the hitch, you'll need a trailer wiring harness, a ball mount and a trailer ball in the correct size to complete your towing system. For a wiring harness, use # 118805 and # C45070 for a ball mount. For a 1-7/8 inch trailer ball, use # 19260 or # 63845 for a 2 inch ball. You'll also need a # PC3 pin and clip.