Are Grease Seals RG06-050 a Direct Replacement for Timken Seals 171255

Question

Question:

Is this seal the correct replacement for part# 171255? I also see tc and tcm on the seal. Thanks.

asked by: Rod

0

Expert Reply:

You are correct, the Grease Seals 10-19 pair, part # RG06-050, are the direct replacement for the Timken seals 171255.

You can view some additional information on replacing trailer hub components at the links provided.

expert reply by: Andi

0

Answer 1

The key for selecting a replacement grease seal is the reference number, in this case #10-9. The manufacturer code does not matter. This is a single-lip seal with an inner diameter of 1.500-inches and an outer diameter of 1.987-inches. It is…

view full answer...

Answer 2

The Grease Seal #10-9 that you referenced would be the correct replacement seal for your axles. You would just need to order a quantity of two of them since are looking for a pair. It sounds like you are interested in a Bearing Buddy Bearing…

view full answer...

Answer 3

Yes, the Grease Seals #RG06-050 are simply a 2 pack of the Seal #58846. Both are the correct replacements for your seals marked GS-1719DL. We do have the Bearing Kit #BK2-100 which I recommend keeping on hand. This will give you a set of replacement…

view full answer...

Answer 4

The Grease Seal #RG06-050 is indeed the correct replacement for the Dexter 010-019-00. As far as the quality differences go between the 2 products we don't really have any apples to apples comparison information explaining the differences. We can…

view full answer...

Answer 5

A bearing, no matter where it is made, has to meet certain standards for use in the United States. With that said there are some cases where despite having to meet these standards, the US made product is better. When it comes to bearings though I…

view full answer...

Answer 6

The vast majority of bearings that are used on trailers are manufactured in China. I know that there is a looming mentality that anything from China is cheap and will break easily, but in the case of bearings, like the popular #L44649, you will get a…

view full answer...

Answer 7

It is acceptable and highly water insoluble so it is great for boat trailers. Grease like the LubriMatic LMX Industrial Strength Grease #L11390 is a lithium complex. The same is true for Lucas Red N Tacky which means they are compatible.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Are Grease Seals RG06-050 a Direct Replacement for Timken Seals 171255

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching