Required Fascia Trimming to Install etrailer Trailer Hitch # e98848 on 2020 Honda CR-V

Question

Question:

I see that it says fascia needs to be cut for the etrailer hitch on my 2020 CR-V. Can you expand on this? Thanks.

asked by: Brent

0

Expert Reply:

Some trimming of the rear fascia on your 2020 Honda CR-V is indeed required when installing the etrailer Trailer Hitch Receiver # e98848 to allow clearance for the drop-down receiver. You will just need to use some shears/snips to trim about 3" x 1-3/8" section from the bumper, as shown in the attached image from the install manual.

This trimming is what allows the hidden-crosstube appearance of the hitch where only the 2" receiver is actually visible. I have attached a full installation video that you can also use for reference.

expert reply by: Chris R

0

click to enlarge

Answer 1

Fascia trimming is required to install the etrailer Trailer Hitch Receiver #e98848 on your 2024 Honda CR-V, but this is the case for all of the hitches that fit your vehicle. According to the instructions you'll be cutting out a notch that is…

view full answer...

Answer 2

There are indeed two 2" trailer hitches available for your 2020 Honda CR-V; the etrailer #e98848 and the Curt #C13397. These Class III hitches are essentially identical in every way except for the finish/powder coat that they use. I personally…

view full answer...

Answer 3

Hello Ted; the difference between the Curt #C13397 and the etrailer #e98848 is the finish. The Curt has a standard glossy finish while the etrailer features a unique matte black finish. Outside of this the two hitches are identical. I prefer the…

view full answer...

Answer 4

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 5

There are a few distinct differences between the Curt Trailer Hitch Receiver #C13397 and #C12169. The #C13397 has a 2" receiver tube opening and has a matching capacity of 3,500lbs GTW, but higher TW capacity at 525lbs. The #C12169 has a…

view full answer...

Answer 6

Hey Dave, thanks for reaching out! The hitch I recommend picking up for your 2025 Honda CR-V Hybrid is the etrailer Trailer Hitch Receiver #e98848 because of the matte black finish. This not only looks better but it's also more durable than the…

view full answer...

Answer 7

If you check out the attached picture you can see it basically sits flush.

view full answer...

Answer 8

Hey Jason, There are a couple hitch options for your 2025 Honda CR-V Hybrid. All 3 are 2" hitch options with a 3,500lb towing capacity and a 525lb tongue weight capacity. These have all been confirmed with the manufacturer to work with hybrid…

view full answer...

Answer 9

The available trailer hitches for your 2019 Honda CR-V can be pretty easily categorized into hidden and non-hidden groups. I highly recommend going with a hidden-crosstube hitch, especially on a new vehicle like yours, as this is going to create a…

view full answer...

Answer 10

Hey Erica, thanks for reaching out! Since your 2026 Honda CR-V is a Hybrid we're a bit limited on the hitch options, and you'll need to get one that does require some fascia cutting. For this, I recommend the etrailer Trailer Hitch Receiver…

view full answer...

Required Fascia Trimming to Install etrailer Trailer Hitch # e98848 on 2020 Honda CR-V

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching