Replacement Mounting Bracket for Tekonsha P3 Brake Controller for 2019 Toyota Tacoma

Question

Question:

I like the Tekonsha P-3 trailer brake which I have on my 2009 Tacoma. I can see that I can purchase a cable harness 3031-P for my new 2019 Tacoma with factory tow package. What I also would like to know if whether I can also buy the bracket that the Tekonsha P-3 comes with so that it will be easier to switch controller from one truck to the other?

asked by: Steve M

0

Expert Reply:

That's understandable; the Tekonsha P3 # 90195 is one of our most popular and well reviewed brake controllers for a good reason. You can use the replacement bracket # TK5906 to mount the P3 in your new 2019 Toyota Tacoma. You can use this, with the Tekonsha Wiring Adapter # 3031-P to swap this controller between your two trucks as needed.

expert reply by: Erik B

0

Answer 1

There are 2 brackets that you can use for the Primus brake controller #TK90160. First, you can use #6927. I have linked a video of this part for you. And second, you could use #5280. I have linked a video of this part as well.

view full answer...

Answer 2

I have 2 part numbers for you to replace the cradle for your Tekonsha Prodigy P3. Part #TK5901 is the cradle, #TK5904 is the bracket that screws into the dash. You would have to assemble these to parts to have a complete mounting bracket.

view full answer...

Answer 3

Hey Matthew, thanks for reaching out! We do actually carry a plug-in adapter for installing the Tekonsha Prodigy P3 #90195 on your 2020 Silverado 1500. What you're looking for is the Wiring Adapter #3064-P. Is the Prodigy P3 brand new, or are you…

view full answer...

Answer 4

We do have the replacement P3 mounting bracket part #TK5901 you are looking for.

view full answer...

Answer 5

You can absolutely use the same harness from your Tekonsha P2 #90885 to plug in to your Tekonsha P3 #90195 since the hardwire harness #7894 that the P2 uses has the same connector as the hardwire harness #20127 that is used for the P3. The only…

view full answer...

Answer 6

The Plug-In Wiring Harness #3064-P that you referenced is the correct brake controller harness for your 2019 Chevy Silverado 1500 and it is actually a brand new product for this generation of GM trucks (it currently only fits the 2019 model Silverado…

view full answer...

Answer 7

Hi there Ron; the correct Tekonsha brake controller wiring harness for your 2024 Chevy Silverado 1500 is the following: - Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers #3064-P

view full answer...

Answer 8

I have 2 part numbers for you to replace the cradle for your Tekonsha Prodigy P3 #90195. Part #TK5901 is the cradle, #TK5904 is the bracket that screws into the dash. I am not sure which one you are using now but hopefully the alternative to what you…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Replacement Mounting Bracket for Tekonsha P3 Brake Controller for 2019 Toyota Tacoma

Featured Help Information

Miscellaneous Media

Continue Researching