Replacement Mounting Bracket for P3 Brake Controller

Question

Question:

Would like to purchase a second under dash pocket mount for my Teksonsha P3 controller. Dont see that option on the website. Might be part number # TK5901 but that doesnt yield anything on your site.

asked by: Paul G

0

Expert Reply:

We do have the replacement P3 mounting bracket part # TK5901 you are looking for.

expert reply by: Jameson C

0

Answer 1

I have 2 part numbers for you to replace the cradle for your Tekonsha Prodigy P3 #90195. Part #TK5901 is the cradle, #TK5904 is the bracket that screws into the dash. I am not sure which one you are using now but hopefully the alternative to what you…

view full answer...

Answer 2

All the brake controller needs to sense a trailer connection so that you can test it is a slight amperage draw on the output circuit. For that you can use a circuit tester like the part #PTW2993 with one pin grounded and the other on the output pin.…

view full answer...

Answer 3

In terms of stopping, there will be no difference between the Redarc Tow-Pro Liberty #RED52VR and the Tekonsha Prodigy P3 #90195. Both of these are high quality proportional brake controllers that will perform well when it comes to braking. I would…

view full answer...

Answer 4

The RedArc Tow-Pro Elite #RED44FR is comparable in reliability and performance to the Tekonsha Prodigy P3 #90195. The difference is really in the design and features. One of the greatest aspects of the P3 is the LCD screen and presets. One of the…

view full answer...

Answer 5

Both the Redarc Tow Pro Liberty #RED24FR and the Prodigy P3 part #90195 are really excellent brake controller solutions. Functionally they both will work really well but the advantage the Liberty has is that it would only put a knob on your dash…

view full answer...

Answer 6

Hi there Ron; the correct Tekonsha brake controller wiring harness for your 2024 Chevy Silverado 1500 is the following: - Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers #3064-P

view full answer...

Answer 7

You can absolutely use the same harness from your Tekonsha P2 #90885 to plug in to your Tekonsha P3 #90195 since the hardwire harness #7894 that the P2 uses has the same connector as the hardwire harness #20127 that is used for the P3. The only…

view full answer...

Answer 8

Hey Matthew, thanks for reaching out! We do actually carry a plug-in adapter for installing the Tekonsha Prodigy P3 #90195 on your 2020 Silverado 1500. What you're looking for is the Wiring Adapter #3064-P. Is the Prodigy P3 brand new, or are you…

view full answer...

Answer 9

I have 2 part numbers for you to replace the cradle for your Tekonsha Prodigy P3. Part #TK5901 is the cradle, #TK5904 is the bracket that screws into the dash. You would have to assemble these to parts to have a complete mounting bracket.

view full answer...

Answer 10

That's understandable; the Tekonsha P3 #90195 is one of our most popular and well reviewed brake controllers for a good reason. You can use the replacement bracket #TK5906 to mount the P3 in your new 2019 Toyota Tacoma. You can use this, with the…

view full answer...

Answer 11

The Plug-In Wiring Harness #3064-P that you referenced is the correct brake controller harness for your 2019 Chevy Silverado 1500 and it is actually a brand new product for this generation of GM trucks (it currently only fits the 2019 model Silverado…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Replacement Mounting Bracket for P3 Brake Controller

Continue Researching