Does Brophy Turnbuckle TB38 Have a Weight Capacity

Question

Question:

Is this the same turnbuckle that is used in the Brophy Basic Camper Tie-down kit TDHP? What is the safe working load to the turnbuckle and the ultimate breaking strength?

asked by: Kurt H

0

Expert Reply:

Yes, the turnbuckle part # TB38 is one of the turnbuckles that comes with the kit part # TDHP which has a 3,000 lb capacity as a set. The 3,000 lbs would be a safe working load limit and not the break strength capacity which Brophy does not list.

expert reply by: Jameson C

0

Answer 1

Hey Brady, Brophy in the past has told us that the tie downs part #HSWB don't have a weight capacity but you would want to make sure you use them only with campers that were designed to fit the bed length of the truck. The turnbuckles part #TDHP…

view full answer...

Answer 2

Thank you for the image Mike. You are most likely going to need the 5 Step Hand Rail #AHR5 but I do recommend measuring to see where the handrail is going to end up. First of all the post for the handrail places the bottom of the rail 43" from…

view full answer...

Answer 3

That is a good question, and you can leave your current fold-out steps up and in the folded position when installing the mounting bracket of the Brophy Scissor Steps. The reason is, the bracket will be installed just underneath the door so as long as…

view full answer...

Answer 4

The Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs item #TDHP are going to be the shortest option we carry. With the hooks on the turnbuckle portion out from the inside of one hook to the inside of the other hook is 12". The minimum…

view full answer...

Answer 5

For the fan motor you mentioned having black would be power and white would be ground. Also, since this is a DC motor if you reverse the wiring it will just reverse the direction of the fan.

view full answer...

Answer 6

Typically trailer campers will have 7-way connectors that you'd run to 7-way socket in the bed of the truck which you could install in your Silverado truck bed part #41157. This will cover the clearance light circuit and have the 12 volt power…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Does Brophy Turnbuckle TB38 Have a Weight Capacity

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching