Remote Lock for the Leer 100XQ Truck Cap

Question

Question:

I’ve purchased a leer 100xq truck cap for my 2016 Chev silverado 1500. Would like to add remote lock function to the rear glass. Would this work for my application? Thanks

asked by: Guy

0

Expert Reply:

Yes, the Pop & Lock Power Lock Conversion Kit for Truck Caps and Hard Tonneau Covers part # PAL9772 or part # PAL9555 will work on the Leer 100XQ Truck Caps because it uses a cable latching mechanism and the handle is not riveted on.

expert reply by: Conner L

0

click to enlarge

Answer 1

The Leer 100XR isn't specifically listed by Pop and Lock but more than likely the #PAL9772 will fit. It requires a frameless, bonded glass door with a 1-1/8" center hole for a rotary latch. This particular kit would upgrade your existing…

view full answer...

Answer 2

I checked with Pop & Lock for you and there is a system that they have confirmed will work with 2011 and newer Leer 100XL, Leer 100XQ, and Leer 700: - Pop & Lock Power Lock Conversion Kit for Truck Caps and Hard Tonneau Covers #PAL9772

view full answer...

Answer 3

The Pop and Lock #PAL9555 is designed to replace your existing handle with a new locking handle, so your existing handle will be obsolete, as will the keys. This kit comes with new keys that will still allow you to manually lock and unlock your truck…

view full answer...

Answer 4

Hey Garth, yes the Pop and Lock Power Lock Conversion Kit part #PAL9772 that you referenced will work great to replace the lock top mount 00651 that you have now.

view full answer...

Answer 5

I do have an option for you to get the locks working again but we don't carry Load Lock so I don't have any advice or replacement parts for this. That said, you should be able to pretty easily replace this with the Pop & Lock Power Lock…

view full answer...

Answer 6

I have a solution for you, but the Pop & Lock Power Lock Conversion Kit for Truck Caps and Hard Tonneau Covers #PAL9772 isn't going to work for you since the cycle palm handle latch on your A.R.E. LSII hard tonneau cover, uses rods to open…

view full answer...

Answer 7

Because your A.R.E. Topper has the actuating rods instead of a wire pulley setup you'll need to use the Pop & Lock Power Pop Remote Keyless Entry Kit for Hard Tonneau Covers #PAL9000, which will replace your old rotary latch. The actuating…

view full answer...

Answer 8

The Leer 180XL Truck Bed Camper uses a cable locking system as opposed to a rod locking system from what I was able to research so the Pop & Lock Power Locking Handle for Truck Caps and Hard Tonneau Covers part #PAL9555 should work great. Please…

view full answer...

Answer 9

Hey Erik, so we checked with Pop & Lock, and while they did not say whether the Power Locking Handle #PAL9555 could fit a Leer 100R cap, they did provide information about the requirements you need on your cap. Firstly, your truck must be already…

view full answer...

Answer 10

The Leer 100R camper shell does not have lock cylinders that are directly compatible with anything we currently offer. The Bolt Lock #BL7023482 you referenced are for tool boxes and the product dimensions are 2 x 1.5 x 1.5 inches.

view full answer...

Answer 11

The main trailer wiring harness is located under the truck bed, usually above the spare tire. There is usually a socket for your trailer connector to plug into, but if you peel back the wire loom you will find a light blue wire further up in the…

view full answer...

Answer 12

Yes. Thule Square Bars like the #TH712400 are compatible with the Thule Rapid Podium Feet #TH460R. In order to mount the #TH460R to your 2014 Subaru Impreza you'll also need the Fit Kit for Thule Podium-Style Roof Rack Feet- 3068 #THKIT3068.…

view full answer...

Remote Lock for the Leer 100XQ Truck Cap

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching