Replacement Landing Gear for 2007 Keystone Raptor
Updated 01/02/2020 | Published 01/01/2020
Products Featured in This Question
Question:
Will this Landing gear set work to replace the landing gear on my 2007 Keystone raptor RP3612dp?
asked by: Eric G
Expert Reply:
You'll want to confirm the distance between the weld stops where your current landing gear are installed to determine which landing gear set can be used as a replacement. The # RVLG-8000 has 15-1/2" measured from the inside of the weld stop on top to the inside of the weld stop on the bottom, and 17-1/2" from the outside of the top weld stop to the outside of the bottom weld stop. This landing gear set has an 8000-lb capacity and 36-1/2" total lift.
If you need a manual crank handle for this landing gear set you can use the # RVLG-HDL. If you wanted to add a motor to this landing gear set you will want to use the # M1230 and a switch can be added with # LG-145236.
Product Page this Question was Asked From
Landing Gear Set - 36-1/2" Lift - 8,000 lbs
- Camper Jacks
- 5th Wheel Camper
- Landing Gear
- Steel
- 7001 - 8000 lbs
- Manual Jack
- 36 Inch Lift
- Weld-On
- 2 Jacks
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Landing Gear Set - 36-1/2" Lift - 8,000 lbs
- Shop: Replacement Lead Jack w/ Drop Leg for Stromberg Carlson Landing Gear - 29-1/2"
- Video: Feature Review Replacement Follow Leg for Stromberg Carlson Landing Gear
- Video: Replacement Lead Jack w/ Drop Leg for Stromberg Carlson Landing Gear Spec Review
- Shop: Lippert Components 32" Lead 5th Wheel RV Landing Gear Drop Leg w/Snap Pin
- Shop: Replacement Follow Leg for Keystone Montana 5th Wheel Landing Gear
- Shop: Lippert Manual Landing Gear Set w/ Handle - 37" Lift - 6,000 lbs
- Q&A: Replacement Landing Gear Set Option for Jayco Eagle 5th Wheel Trailer
- Search Results: trailer jack
- Search Results: vent cover rv vents and fans
- Search Results: ladder bracket
- Shop: Lippert Venture Lead Leg Repair Kit for 5th Wheel RV Landing Gear
- Video: All About the Lippert Venture Lead Leg Repair Kit for 5th Wheel RV Landing Gear
- Article: Trailer Wiring Diagrams
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Search Results: trailer hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Hitch
- Video: A Look at the Power Mountain Tallboy 6 Ton Off-Road Bottle Jack with a Military Cargo Trailer
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Suspension Enhancement
- Q&A: Does etrailer Carry Furrion Chill Cube w/ Heat Pump to Replace Dometic Duo-Therm
- Search Results: trailer wiring
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Replacement Propane Gas Detector for an Atwood 31013 Propane Detector
- Article: How to Measure for Trailer Hitch Drop
on Camper Jacks
