Replacement 6 Bolt Agricultural Hub for 1978 John Deer Implement Trailer

Published 12/28/2019

Products Featured in This Question

Bearing Kit, LM67048/25580 Bearings, 10-36 Seal

(3442)

$31.94

Replacement Race for 25580 Bearing

(1285)

$14.06

Replacement Trailer Hub Bearing - 25580

(2141)

$17.36

Dexter Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 6 - Agricultural

(28)

$129.25

Grease Seal - Double Lip - 2.125" ID - 3.376" OD - GS-2125DL

(2757)

$14.76

Grease Seal - Double Lip - 2.250" ID - 3.376" OD - GS-2250DL

(2548)

$15.05

Replacement Race for LM67048 Bearing

(1285)

$2.02

Replacement Trailer Hub Bearing - LM67048

(2141)

$12.85

Question:

Hub is off of implement trailer purchased from John Deere in 1978 hub is broke and need a replacement bearing size is outer urb lm67048 inner bearing size is urb 25580 seal number can’t read but crossed on at Napa with skf. 21352.

asked by: Todd R

Helpful Expert Reply:

Given the bearing numbers and the fact that it's a 6 bolt hub, you're needing the Dexter # 42660UC1 Agricultural hub. The bearings, races and seals are sold separately. You'll need the # 25580 inner bearing, the # LM67048 outer bearing, the # 25520 inner race and the # LM67010 outer race. The grease seal we carry that cross-references to the SKF 21352 is part # GS-2125DL.

This hub is typically used with the # GS-2250DL grease seal, so I'd recommend you use a digital caliper on the surface of the spindle where the grease seal rides. The # GS-2125DL seal has an ID of 2.125 inches while the # GS-2250DL has an ID of 2.250 inches (both have the same OD), so you'll want to measure to ensure you get the correct one.