Can the Reese Tow and Store Lock Kit Be Keyed Alike

Question

Question:

I have 4 trailers this would work for. Can I get them all keyed alike? I also have one gooseneck. I’d love to have one key that would open all of them.

asked by: Kyle

0

Expert Reply:

The Reese Tow and Store Lock Kit part # RP7014700 does not have a keyed alike option so there would be no way to obtain multiple kits with the same key unfortunately. However, you could combine any of the etrailer.com locks and they would all come keyed alike so long as you select that option on the product page. I have attached a list of these options for you below.

The etrailer.com Trailer Coupler Lock part # e98895 or part # e98897 could be combined with multiple etrailer.com Trailer Coupler Lock part # e98886 for example to obtain the same key for all your trailers. The gooseneck coupler locks however like the EZ Lock Gooseneck Coupler Lock Combo part # BLTL-53-40D2 are specific to the coupler and there would not be a way to match this key with any of the above locks.

expert reply by: Conner L

0

Answer 1

I took some measurements off the etrailer Trailer Coupler Lock #e98895 that will help you to determine if this will fit your coupler. The maximum width of the coupler tongue channel is 4-1/2" wide, and 2-3/4" deep. The locking pin is…

view full answer...

Answer 2

Thank you for your purchase of our etrailer.com Trailer Hitch Receiver Lock #e98881. We do offer a replacement key set for this lock, It is the "Replacement Key for etrailer Hitch and Coupler Locks - Key 029 #e75UR.

view full answer...

Answer 3

Correct, the etrailer.com Trailer Coupler Locks like part #e98895 or part #e98889 must all be purchased at the same time in order to take advantage of the keyed alike option. I wish we could match the lock to a set of keys you already have but this…

view full answer...

Answer 4

Hey Doug, That's a good question because fit is really important so the cover stays snug on your trailer, and there is a specific way to measure for the etrailer covers. It's pretty simple, and what you want to do is measure the body of the…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 9

Hey Brandon, I would strongly recommend sticking with the Tekonsha RF brake controller part #TK94FR. We know this works really well and it sounds like it worked well for you too. The Curt Echo is not reliable enough for me to really ever recommend it…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 12

For your 2024 Nissan Frontier I recommend the Redarc Tow-Pro Liberty Brake Controller #RED24FR. I like the Liberty because it is simple, reliable, and looks great in any vehicle. The main unit installs behind the dash, so only the control knob will…

view full answer...