Replacement Mounting Hardware for Sears X-Cargo Roof Box

Question

Question:

I bought a used Sears X-cargo, but it’s missing mounting hardware. How do I know which one to purchase?

asked by: Stacy

0

Expert Reply:

We actually offer a replacement hardware kit for the Sears X-Cargo boxes like what you have with the part # TH05603. This comes with everything you'll need to mount on your roof rack.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Hi Jeremy! For your older Thule Summit Cargo Box, you will want the Replacement QM3 - Quick Mount Hardware - for Adventurer Cargo Box #TH04997. Yes, it does say it's for an Adventurer Cargo Box, but we have found they used the same hardware as…

view full answer...

Answer 2

The Replacement Hardware Kit for Searsbox Cargo Box #TH05603 should work for your Karrite 1100 roof box but I am attaching some dimensional photos of the hardware so you can double check on your end. If these don't match up then you may need to…

view full answer...

Answer 3

We have previously confirmed with Thule (the manufacturer of this cargo box) that the correct replacement mounting hardware for your Sears X-Cargo 28-7271 is the Replacement Hardware Kit #SR05587 which does include the U-bolts required for this cargo…

view full answer...

Answer 4

Thank you so much for the info and pictures! The correct replacement key for your lock for is part #THKEYN2982 and the correct replacement mounting hardware is part #TH05603. The mounting hardware does look a little different than the original…

view full answer...

Answer 5

Yes, you can use the Replacement Hardware Kit for Searsbox Cargo Box #TH05603 to attach your old Thule Sidekick cargo box to your 2018 Subaru Outback Wagon.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Replacement Mounting Hardware for Sears X-Cargo Roof Box

Products Featured in This Question

Continue Researching