Valve Stem Hole Size for 16 inch Trailer Wheel for Replacement Tuson Valve Stem TPMS

Question

Question:

What size metal valve stem do I need for a 2015 Columbus 385 BH Tires size 235 80 16 with Monitor

asked by: Roy E

1

Helpful Expert Reply:

On a 16 inch trailer wheel the correct size valve stem hole would be .625 inch so the replacement valve stem you'd want is the part # 335TPMS-6V. This can be used on steel or aluminum wheels too.

expert reply by: Jameson C

1

Answer 1

The only trailer tire sensors that will work with the factory TPMS on your 2021 GMC Sierra 3500HD Denali is the GM kit 85110397 that is sold through GM. These sensors will need to replace the valve stems on your trailer wheels. I recommend staying…

view full answer...

Answer 2

Hey Lorenzo. Your 2024 Chevrolet Silverado 3500 has what's called Pulse Wave Modulation, which will not provide the wireless cameras with the correct power it needs to run when connected. This is a power saving feature in newer trucks. To fix…

view full answer...

Answer 3

For the newer GM trucks like your 2024 Chevy Silverado 2500 you do need to use the Furrion GM adapter part #FR87PR with the Furrion Observation Vision S systems like the part #FOS43TASF that you referenced. This is the adapter that the video you…

view full answer...

Answer 4

Hey there Martin! Yep, if you're using a Furrion RV Observation Camera with your 2025 Chevy Silverado 2500 HD Custom 4x4, you'll likely need the Furrion 7-Way Vehicle Power Adapter with Power Switch part #FR87PR. Newer Chevy and GMC trucks…

view full answer...

Answer 5

Hey Eric, I know you mentioned you were installing the Vision S+ camera, is the monitor as well a vision S+ monitor or is it the monitor for the old Vision S system? The 2 systems components are not compatible with each other so the camera and…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hey Michael. The backup camera that comes with the Furrion Vision S+ System item #FR57AD has built in mounting holes in the casing. It comes with four #6 x 3/4" flat head self-tapping screws, four #4 x 1/4" self-tapping screws, sealant, and…

view full answer...

Answer 8

The newer Chevrolet and GM pickup trucks have a known power deficiency issue with the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras #FCE48TASL-05. There is likely nothing wrong that you did, the problem is the…

view full answer...

Answer 9

Hi Kyle; we don't carry an adapters but what you can do is install the Roadmaster 12 Volt Outlet Kit, 20 amps #RM-9332. This ensures constant, reliable power for the camera system. It gets harder and harder to trust those adapters as random…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Thanks for reaching out, i have a couple things for you to do. Let me explain below: *12V PWM Filter for RV Backup Camera Systems - Hardwire #VGR64VR. The newer GMC vehicles use PWM(Pulse With Modulation) in their electrical systems. The Furrion…

view full answer...

Answer 12

The most likely cause of the "no signal" error you are receiving with the Furrion Vision S Wireless RV Backup Camera System part #FOS43TASF is due to an interruption on the camera's power wire. Make sure that the camera is receiving…

view full answer...

Valve Stem Hole Size for 16 inch Trailer Wheel for Replacement Tuson Valve Stem TPMS

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching