Wiring for 2020 Hyundai Santa Fe with Factory Trailer Tow Package

Published 10/23/2019

Products Featured in This Question

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(957)

$53.93

No-Drill Mount for Electrical Mounting Bracket - Short

(1180)

$21.57

Mounting Bracket 4-Pole Flat

(6103)

$9.20

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

(342)

$215.28

etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs

(1375)

$89.12

Question:

I have the factory tow package on my 2020 Santa Fe. What wiring do I use for this?

asked by: Karen

Expert Reply:

The correct wiring kit for your 2020 Hyundai Santa Fe with the factory tow package is the Curt T-Connector. I have attached an installation video of this on a '19 Santa Fe that you can check out.

If you'd like to mount the wiring next to your trailer hitch receiver, then you also need the Mounting Brackets # 18144 and # 18140 to complete the installation.

If you don't already have a trailer hitch, then I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 75908 because it already has a bracket welded to the crosstube which gives you a cleaner looking install and you only have to use the part # 18144 for your wiring then. I have attached an installation video and some pictures of this on a '19 Santa Fe for you to reference as well.

To complete a towing setup you also need a ball mount kit. I recommend checking out Ball Mount Kit # 989900 because it includes two ball mounts, one with a 3/4” rise/2” drop and the other with a 2-3/4” rise/4” drop, a 1-7/8” hitch ball, a 2” hitch ball, and a pin and clip. You will want to refer to the attached ball mount article to ensure that this kit is correct for your towing application.