Does Draw-Tite Trailer Hitch for 2019 BMW X5 Require Bumper Fascia Trimming  

Hey Jason, The Curt Trailer Hitch Receiver #C85VV doesn't have a tech note stating that the Curt Trailer Hitch Receiver #C85VV would interfere with the hands free liftgate functionality, but even if it does you can just wave you foot on either…

Hey Jason, We don't have any tech notes stating that the Draw-Tite Max-Frame Trailer Hitch Receiver #76288 would interfere with the hands free liftgate feature, but even if it does just waving your foot on either side of the receiver tube should…

Well for starters you'd need to pay the cost of the hitch, but for installation that would depend on the place you go to. If you plan on coming to etrailer and having us install it, you'd need to call our customer service department and…

It's not complicated at all to use your Kuat 4 Bike Rack with your BMW X5, you're just going to need at least a class III hitch like the Curt Trailer Hitch Receiver #C85VV. I'm not going to sit here and tell you that it's an easy job…

I attached a picture of the Draw-Tite #76288 on an X5. It's from the install details so it isn't the best picture in the world but you can see the hitch. It actually has a ball mount inserted into it. We haven't had the chance to install…

The Draw-Tite Max-Frame Trailer Hitch Receive part #76288 which is a fit for a 2019 BMW X5 (Non M-Sport) will sit directly below the rear bumper. I don't have any measurements or photos yet as we have not yet had a chance to install this but it…

The Draw-Tite Max-Frame Trailer Hitch Receiver #76288 that is confirmed to fit your 2022 BMW X5 will require you to trim the fascia on your bumper and mounting plate. But these trimmings are not going to be visible with the hitch installed. You will…

We have the Draw Tite hitch part #76288 as a confirmed fit that would be a really great choice for your 2014 BMW X5. It's mostly hidden and has really great towing capacities so it's the best hitch for your vehicle.

The only trailer hitch we have listed as a confirmed fit for your 2019 BMW X5 at this time is from Draw-Tite, not Curt. For this, you will want to use the Draw-Tite Max-Frame Trailer Hitch Receiver part #76288. This hitch is a direct fit which means…

Yes, the Draw-Tite Max-Frame Trailer Hitch Receiver #76288 for your 2020 BMW X5 will require you to trim a section of bumper fascia to allow clearance for the drop-down receiver. You will just need to use a utility knife to cut out this 3-1/4" x…

The correct hitch for your 2021 BMW X5 M50i is the #SH89VR. If you want the towing kit included then you need the #SH25VR. The others will not fit. They are designed for the true M version, like the M Competition. The #SH25VR is the same hitch as the…

That's a good question, and there is no type of fascia or bumper trimming needed in order to install the Stealth Hitches #SH89VR or #SH25VR on your 2021 BMW X5. The bumper and fascia remains intact, though there is a small piece under the vehicle…