Does the Draw-Tite Hitch for a 2022 BMW X5 Require Trimming the Fascia  

Hey Jason, The Curt Trailer Hitch Receiver #C85VV doesn't have a tech note stating that the Curt Trailer Hitch Receiver #C85VV would interfere with the hands free liftgate functionality, but even if it does you can just wave you foot on…

Hey Jason, We don't have any tech notes stating that the Draw-Tite Max-Frame Trailer Hitch Receiver #76288 would interfere with the hands free liftgate feature, but even if it does just waving your foot on either side of the receiver tube…

Well for starters you'd need to pay the cost of the hitch, but for installation that would depend on the place you go to. If you plan on coming to etrailer and having us install it, you'd need to call our customer service department…

It's not complicated at all to use your Kuat 4 Bike Rack with your BMW X5, you're just going to need at least a class III hitch like the Curt Trailer Hitch Receiver #C85VV. I'm not going to sit here and tell you that it's an easy job…

The Draw-Tite Max-Frame Trailer Hitch Receive part #76288 which is a fit for a 2019 BMW X5 (Non M-Sport) will sit directly below the rear bumper. I don't have any measurements or photos yet as we have not yet had a chance to install this but it…

I attached a picture of the Draw-Tite #76288 on an X5. It's from the install details so it isn't the best picture in the world but you can see the hitch. It actually has a ball mount inserted into it. We haven't had the chance to install…

For the Hidden Hitch by Draw-Tite Trailer Hitch Receiver #DT96GR on your 2019 BMW X5 you will need the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit #119250KIT. This will give you a 4-way flat…

Thanks for the additional information! I have a solution for you but the Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit item #SH25VR does not have a towing option available without the wiring harness. The item #SH89VR is used for bike…

Yes, the Draw-Tite Trailer Hitch Receiver #76288 that fits your 2019 BMW X5 does require some trimming of the bumper fascia, though it is not going to be noticeable. As you can see by the cut out of the linked directions, the fascia will need to be…

When installing the Draw-Tite Hitch #76288 on your 2021 BMW X5 (without the M Sport package), you first need to use a 13mm socket to remove 2 nuts from the exhaust (1 each side). Next, you will disconnect the back-up sensor wiring and hands free…

You are 100 percent correct that in order to tow with your 2020 BMW X5 you will need a trailer hitch along with a trailer wiring harness to power your trailer lights and a ball mount which will attach your trailer to your BMW. Let's start with…

We have the Draw Tite hitch part #76288 as a confirmed fit that would be a really great choice for your 2014 BMW X5. It's mostly hidden and has really great towing capacities so it's the best hitch for your vehicle.