How to Install CR Brophy Tailgate Scissor Step Bracket # TSSB on 2004 Dodge Ram

Question

Question:

How do I install this on my 2004 Dodge pickup tailgate? Since it came with no instructions or extra parts such as screws, etc. I need to know how this bracket is suppose to fit my truck. With the way its made it will not flush up to the tailgate and the screw holes dont allow for screws to be put into the tailgate.

asked by: Steve

0

Expert Reply:

The scissor step bracket has two L shaped pins on the inside of the angle iron. Measure the center to center distance between the two pins. You will want to drill two 7/16 inch holes into the tailgate that are the same distance apart as the pins that are 5/8 of an inch back from the edge of the tailgate (see Photo).

The L shaped pins would insert into the holes drilled into the tailgate, so that it locks into place, and the steps would clip to the front of the bracket.

expert reply by: Mike L

0

click to enlarge

Answer 1

If you are looking for something smaller than the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs #F2706 to shore up the suspension on your 2018 Ram 2500 Power Wagon, you will want to look at a Timbren set up. Though I do prefer air…

view full answer...

Answer 2

The Brophy Scissor Step Bracket #TSSB will install on the edge of your tailgate. You will have to drill two holes for the L shaped pins. After drilling, all you have to do is simply insert the L pins into those holes and attach you Brophy steps! For…

view full answer...

Answer 3

Appreciate you reaching out Ryan, The best way to determine if the Brophy Tailgate Scissor Step #AS23 will work with your F150 is to measure from the top of the tailgate down to the ground. That measurement will help determine whether the steps are…

view full answer...

Answer 4

That is a good question, and you can leave your current fold-out steps up and in the folded position when installing the mounting bracket of the Brophy Scissor Steps. The reason is, the bracket will be installed just underneath the door so as long as…

view full answer...

Answer 5

I've attached some dimensions below to help you determine fitment of the Brophy Camper Scissor Steps #AS24 with your truck bed camper. The mounting bracket is 24" long x 1" tall (1-3/8" tall if you include the V-Clamps) so…

view full answer...

Answer 6

I went to the warehouse and took a measurement of the Brophy Camper Scissor Steps, part #AS05 for you. The distance form the top mounting bracket to the front of the lowest step is 39-1/4 inches. The distance form the frame below the lowest step is…

view full answer...

Answer 7

Yes, you can mount the Brophy Steel Scissor Steps, #SS04, to a truck tailgate. I recommend installing the mounting bracket on the top of the tailgate (see photo). To install the mounting bracket, you will want to use four 1/4 inch x 1-1/2 inch long…

view full answer...

Answer 8

We can set you up with new steps so that you love your whole camper setup, steps included. Based on the information you provided, I recommend taking a look at the Brophy Camper Scissor Steps #AS25. This is a 5-step assembly that can expand to between…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Welcome back Mike! To attach a set of steps to your Palomino 1251 truck camper, I recommend the TorkLift GlowStep Camper Scissor Steps item #TLA7804. They're going to bolt directly to your Palomino right below the door, with the included…

view full answer...

How to Install CR Brophy Tailgate Scissor Step Bracket # TSSB on 2004 Dodge Ram

Product Page this Question was Asked From

Continue Researching