Brophy Clamp On Camper Tie-Downs Replacement T-Bolt

Question

Question:

I have the brophy clamp tie-downs and i took them out of the pockets and lost one of the dang T-shaped bar parts will i have to buy a new clamp

asked by: Carol D

0

Expert Reply:

We do have a replacement T-bolt available for the Brophy Camper Tie-Downs part # HSAB, part # HSBP, part # HSCP, part # HSSF or part # HSWB. The replacement T-Bolts are part # BR2007 and only come in a pack of four. I have attached an installation video of HSAB for your reference.

expert reply by: Heather A

0

Answer 1

Hey Carson, congrats on your new potential purchase. The Brophy Turnbuckles item #TDHP would be the best turnbuckles to use with the Brophy Slide In Camper Tie-Downs item #HSSF. These have a 3,000 lbs capacity and can be easily adjusted for a tight…

view full answer...

Answer 2

The Brophy Clamp On Camper Tie-Downs #HSAB are typically used for much older model trucks but can still work if your 2015 GMC Sierra 2500 meets the following criteria: External bed rail width cannot exceed 5-1/2" Requires at least 2" of…

view full answer...

Answer 3

Hey Timothy, thanks for reaching out! The Brophy Slide In Camper Tie-Downs #HSAB are a bit more universal, and while they could definitely work for your 2017 Ford F-150, I don't have a way to confirm this on my end so you'll just need to…

view full answer...

Answer 4

To mount your camper in the bed of your 2002 Ford F-150, you can use the Brophy Camper Tie Downs, #TDSF, as long as your camper is not longer than 8 ft. These tie downs will install in the stake pockets on the top of your truck bed walls. If your…

view full answer...

Answer 5

Our most economical camper tie downs are the Brophy Camper Hold Downs, #HSSF, and the Stake Pocket Tie Downs, #TDSF. These are universal tie downs designed to fit a number of trucks. I spoke with Brophy and they have not tested these tie downs on a…

view full answer...

Answer 6

Yes, the Brophy camper tie downs like the #HSAB can be used with bed rail covers. If you check out the picture I attached you can see a set installed on a bed rail with plastic covers.

view full answer...

Answer 7

The Torklift Camper Tie Down part #TLC2217 that you referenced has been confirmed as a front camper tie down for your 2015 GMC Sierra 1500 that has a factory hitch so I would recommend it for you.

view full answer...

Answer 8

The TorkLift Custom Frame-Mounted Camper Tie-Downs - Front #TLC2217 is the correct fit for 2014 Chevy Silverado 1500 models with 6.5 foot bed regardless of the cab model. Your Double Cab was only available in that bed length for your model year, so…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Brophy Clamp On Camper Tie-Downs Replacement T-Bolt

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching