Video Transcript for Review of TorkLift Truck Camper Tie Downs - Custom Frame Mounted Rear Camper Tie Downs - TL85WR

Hi everybody, Andy here with etrailer.com. Let's take a look at these Torklift custom frame mounted rear camper tie downs. Now these tie downs are going to provide attachment points at the back of your truck bed for securing a bed mounted camper. Turn buckles are required to attach a camper to these tie downs, and those are sold separately. So if you do not already have turn buckles, you can find them here at etrailer.com. Now these have been designed to fit your 2020 and newer Jeep Gladiator with the factory hitch, and on custom fit parts such as these tie downs, I do recommend taking advantage of our vehicle fit guide here at etrailer.com.

Just input the year, make, and model of your vehicle and answer any other questions the fit guide might have for you, and the fit guide will confirm that these will work for you or if we have something comparable that will work for you. You can also find the front tie downs that you need for your vehicle using the fit guide as well. Just go through the same process and you'll be able to find the front tie downs for your vehicle. Now I do wanna mention that if you have a plastic or spray-in bed liner, it is important that you use a rubber mat under the camper to eliminate any sliding or bouncing. So the frame mounted design is going to ensure excellent handling because securing your camper to your truck's base instead of its bed, is going to better distribute weight to keep your setup from being too top-heavy.

These brackets are going to fit tight to the frame of your truck, so there will be no loss of ground clearance, and these are gonna use preexisting holes in the frame so there's gonna be little to no drilling required. These steel tie down inserts are going to secure to these durable steel receiver brackets, and these inserts can be easily removed from the frame mounted brackets with the included bale pins. And once you have them removed, they're gonna be virtually undetectable so I'm gonna go ahead and just give you a brief demonstration of that. So I went ahead and removed the pin here. I'm just going to remove the insert.

So as you can see, when you have that insert removed, you're really not gonna be able to see that receiver bracket and you can just take the inserts and maybe put 'em in the back of the cab of your truck when you're not using them. I did want to point out that we do have these two holes here on these inserts, and those are the holes that the safety pin's gonna go through; the bale pin's gonna go through. So for instance, if your camper is a little bit wider, you would use this first hole on the insert to have this tie down point stick out a little bit farther. If your camper is a little bit narrower, you can move it into that second hole. And so just to make sure that this is going to fit on my table, I'm gonna slide this back in using that second hole there, and then replace the bale pin; and then that's going to allow me to secure that insert into place, just like that.

Now these do feature a high impact powder coat finish that's going to give you an extra layer of protection to the brackets and to the inserts, and you're going to get everything that you see here on my table. You're gonna get the two rear tie down inserts, the frame brackets, the necessary hardware that you see laid out here on my table, and then instructions to guide you through the installation process. And these are made here in the USA, and they do have a lifetime warranty from Torklift. Well, that's gonna wrap up our quick look today, I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.