Recommended Kitchen Faucet for 1995 Lance Camper

Question

Question:

Need a kitchen faucet for my 1995 Lance truck camper What would you recommend ?

asked by: Gerry

0

Expert Reply:

We have a large selection of RV kitchen faucets available and the right one for your 1995 Lance truck camper is going to depend both on your existing setup along with your personal preference in terms of style and color.

Just as an example I really like the Phoenix Faucet Hybrid # PF231461, which appears to have a similar design to what's typically used in Lance campers based on my research, which can be mounted as a 1-hole or 3-hole installation using the round deck plate or oval deck plate that comes included.

Its round base measures 2-5/8 inches in diameter and the oval base measures 10-1/4 inches wide and 2-1/2 inches deep. This is a really nice faucet that features a brushed nickel finish for a sleek look and pull-down head for easy cleaning. I have included a short video review as well.

If you need something a bit different please just let me know what kind of faucet you currently have or if you just have a different design in mind. I have also attached a link that will take you to our complete selection of kitchen faucets that you can look through.

expert reply by: Chris R

0

Answer 1

Hey Vic, so we have several different Phoenix compression stem replacements which I linked to this page but we don't have a way to know for sure what you need so you'd need to pull yours out and compare them to the ones linked. If you can get…

view full answer...

Answer 2

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 3

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 4

Hey Kyle! The Pacbrake Alpha HD Air Bag Suspension Kit #PB22RV installs in the same location as most fifth wheel and gooseneck brackets. I would expect to have to do some drilling to install these with your B&W Turnoverball. Instead, I recommend…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

Hey Dave. The T5079 RV Designer Entrance Door Lock item #RD68SR is made of a die-cast zinc alloy for the housing and handles. The strike plate, plunger load pins and plunger end plates are made of steel. The parts are then black powder coated and…

view full answer...

Answer 7

Hello Bob, thanks for reaching out. We do have a lock that will work with the etrailer Adjustable 2-Ball Mount #e66PR. For that I recommend the following: - etrailer Hitch Receiver Lock for 2" and 2-1/2" Hitches - Flush - 3-5/8" Span -…

view full answer...

Answer 8

Hey Bruce! The outside dimensions of the Double Rocker Switch #37212015 including the faceplate are 2.86" wide x 2.437" high. It is also available in black #37212235 and brown #37212145. What are you using the switch for?

view full answer...

Answer 9

Hey Adam, welcome back! Since your 1997 Ram 3500 has the B&W Turnoverball item #BWGNRK1394 installed, you'll need the Pacbrake Alpha HD Air Bag Suspension Kit item #PB82FV. This set of air bags has a 5,000 lbs support capacity, which is the…

view full answer...

Answer 10

Thanks for reaching out Kathleen. The TorkLift Custom Frame-Mounted Tie Downs #TL66ZV include the complete set of front and rear tie-downs for both the driver and passenger sides of your truck. This kit is the correct fit provided your Toyota Tacoma…

view full answer...

Answer 11

Hey Brady, Brophy in the past has told us that the tie downs part #HSWB don't have a weight capacity but you would want to make sure you use them only with campers that were designed to fit the bed length of the truck. The turnbuckles part #TDHP…

view full answer...

Answer 12

Hey Cindy, thanks for reaching out. We may have an extension that will work for you. It will help to know exactly how long of an extension you are needing as this will be one of the main deciding factors. Let me know how long you need it to be in the…

view full answer...

Recommended Kitchen Faucet for 1995 Lance Camper

Featured Help Information

Miscellaneous Media

Continue Researching