How to Install a Nev-R-Lube Bearing
Updated 09/06/2019 | Published 09/05/2019
Question:
Replacement procedure
asked by: Ed C
Expert Reply:
The great thing about the Nev-R-Lube # 31-71-3 bearing is that the seals, bearings and races come in one piece so you don't have to worry about pulling them out of the hubs to re-pack bearings. It is recommended that you use a dowel to tap them into place when installing.
You'll need to remove the crown nut from the spindle and then pull the hub off. The old bearing can be tapped out with a dowel and then replaced with the new bearing using a wood block-something that won't damage the bearing. Once the bearing is set you can re-attach the hub and tighten down the crown nut on the spindle.
Product Page this Question was Asked From
50MM Nev-R-Lube Bearing for 8,000-lb Dexters - Qty 1
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 50 MM I.D.
- Bearing 31-71-3
- 8000 lbs Axle
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Detailed Breakdown of the 50MM Nev-R-Lube Bearing for 8,000-lb Dexters
- Shop: 50MM Nev-R-Lube Bearing for 8,000-lb Dexters - Qty 1
- Search Results: nev r lube bearings
- Shop: Grease Cap for Nev-R-Lube Hubs - 3.355" Outer Diameter - Single Lip
- Q&A: How to Remove Nev-R-Lube Bearing from Hub
- Shop: Replacement Spindle Nut for Dexter Nev-R-Lube Hub and Drum Assemblies - Qty 1
- Search Results: dexter never lube
- Shop: Dexter Trailer Hub and Drum Assembly for 7,000-lb Nev-R-Lube Axles - 12" Diameter - 8 on 6-1/2
- Video: Hands-On with the Dexter Trailer Hub and Drum Assembly for 7,000-lb Nev-R-Lube Axles
- Q&A: Where Does Brake Controller Install Harness Plug in 2023 Chevy Suburban RST
- Video: Replacement Magnet Kit for 12" Electric Trailer Brake Assemblies: The Breakdown
- Video: Replacement Trailer Brake Magnet for 12" Brake Assemblies Review
- Q&A: Can You Reuse A Dexter Nev-R-Lube Spindle Nut
- Search Results: electric trailer brake assembly
- Search Results: electric brake parts
- Search Results: 008~219~18
- Search Results: k71~995~00
- Search Results: 8~385~81
- Shop: Replacement Brake Wire Retaining Clip for Electric Trailer Brakes - Qty 1
- Shop: Dexter Electric Trailer Brakes - Parking Brake Ready - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Replacement Magnet Retaining Clips for 10" and 12" Electric Trailer Brakes - Qty 10
- Q&A: Procedure for Replacing 31-71-3 50mm Sealed Nev-R-Lube Bearings
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Suspension Enhancement
- Article: How to Measure for Trailer Hitch Drop
on Trailer Bearings Races Seals Caps
