Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this 50 millimeter Dexter Nev-R-Lube Bearing Cartridge for the Dexter Nev-R-Lube 8,000 pound axles. Now, this is a 50 millimeter cartridge style Nev-R-Lube bearing. Now, this type of bearing does look different than your normal wheel bearings, but basically with this, what you're getting is you're getting both the inner and outer bearing together, and then it's lubricated and then they're sealed in this cartridge. So you have the bearings all put together. So this cartridge you just insert into your hub and drum.
Basically, there's no need to pull the hubs to repack the bearings. There's no need to replace the seals when you check the brakes, and there are no more inner and outer bearings to mess with. It's all combined right into this one cartridge. It does give you the preset adjustments, which makes ease of installation, because human error is virtually eliminated in the bearing adjustments. And this is pre-lubricated that we mentioned at the bearing factory, which will make it resistant to contamination, and it's sealed for life.
So there's no bearing maintenance, gives you increased durability and reliability, and of course, lower maintenance costs. Now, this part will include everything showed here on the table, the 50 millimeter bearing cartridge itself, the large inner snap ring, the smaller outer snap ring, the spindle washer, the spindle nut, and then a torque information ring. Now, this does fit the Dexter 50 millimeter 8,000 pound Nev-R Lube axles with the eight lugs, six and a half inch bolt pattern. This will work on the hub and drum assemblies with the drum size of 12 inches by two inches, and 12 and a quarter inches by three and three eight inches. Few measurements on the cartridge itself, and we're gonna measure it in millimeters.
So the inside diameter is gonna be right at, oops, let's do it in millimeters. There we go. Flip it over. And there's your 50 millimeter measurement. The overall diameter of the whole bearing cartridge itself from one end to the other, 84 millimeters.
And the width on it is right at 54 millimeters wide. But that should do it for the review on this 50 millimeter Nev-R Lube Bearing Cartridge for the Dexter Nev-R Lube 8,000 pound axles..
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
Ratings & Reviews
Gunars S.
3/17/2023
Bearings appear and fit like OEM replacements. Expectation is a long service life.
Don H.
8/7/2021
Temperature still constant. No more heating noted.
Gabe
1/16/2025
Bearings didn’t last a year
Do you have a question about this Trailer Bearings Races Seals Cap?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
7_2_100.jpg)
Dave
9/26/2023
This unusual bearing is used on our tandem axle 200HP wood chipper, we drag it thru the woods,mud and down the hwy. I havent seen These bearing since installation. ie Trouble Free just what we need.