Correct Hinge Seal for Extang Solid Fold Hard Tonneau Cover

Question

Question:

I have an older extang model 56430. Is the correct hinge seal part EX 32560669? I cant see on the pictures what the end profile looks like. Mine looks like a rectangle with a T shape on top. Thanks

asked by: David B

0

Expert Reply:

The hinge seal you've looked at, part # EX32560669 would indeed be the correct hinge seal for your older Extang tonneau cover. Just to be sure, I called Extang and confirmed the fit with my representative.

expert reply by: Mike L

0

click to enlarge

Answer 1

Thanks for reaching out, Russell! You should be able to slide the old seal out and then the Replacement Hinge Seal for Extang Solid Fold 2.0 Tonneau Covers #EX32560669 should just slide right in place of it. If you can shoot me some photos of what…

view full answer...

Answer 2

If you do in fact have the Extang Solid Fold Hard Tonneau Cover #EX56430, which is no longer available, then the: -Replacement Hinge Seal for Extang Solid Fold 2.0 Tonneau Covers #EX32560669 will be the correct replacement hinge seal. Which makes me…

view full answer...

Answer 3

From what I could find, it looks like your OEM tonneau cover is most likely the Extang Solid Fold 2.0 Hard Tonneau Cover EX83590. If that is the case, the correct hinge seals would be the: - Replacement Hinge Seal for Extang Solid Fold 2.0 Tonneau…

view full answer...

Answer 4

The correct hinge seal for an Extang Solid Fold tonneau cover is the part #EX32560669. This is 69 inches long and would need to be trimmed down to the length you need.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Correct Hinge Seal for Extang Solid Fold Hard Tonneau Cover

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching