Dimensions of RV Entry Screen Door Latch

Question

Question:

What are the dimensions of this latch so im certain it will fot

asked by: Robert

1

Helpful Expert Reply:

The mounting holes on the Lippert Components RV Entry Screen Door Latch # LC201471 (RH) and # LC201472 (LH) are 3" apart. The latch has a total length of 3-5/8" and is 1-1/8" wide.

expert reply by: Erik B

1

click to enlarge

Joseph

7/25/2025

Note: the photo stock showing measurements for the latch with hole centers is not the current model for parts 201471 and 201472

Answer 1

Hey Marie, so the screen door latches are mostly universal but there are some variances so it would still be good to measure to be sure if a latch like the part #LC201471 would work. As long as the mounting holes are 3 inches apart this would work.

view full answer...

Answer 2

When determining what screen door latch you would need either the right hand or left hand side you would need to look at the closed door from the inside of your RV. The latch location is the side of the door that it is mounted on. This would mean…

view full answer...

Answer 3

Hello Ted, thanks for reaching out. I went on the Winnebago website and looked at their online manual. I did not see any mention of this screen door latch, and we do not have any other way to look this up. Even on page 158 there was nothing, so I…

view full answer...

Answer 4

As you are standing inside your camper looking at the screen door with the hinge on the left you will need the Right Hand Door Latch for Philips RV Screen Doors #37211205. This is the way most doors on the passenger side of motorhomes are configured.…

view full answer...

Answer 5

Hello Brandon, that’s a classic failing-converter symptom inside the power center, assuming the batteries and battery cables themselves have been checked and are in good working order. If your AC outlets are working but the battery voltage isn’t…

view full answer...

Answer 6

Hey Dee, we have the WFCO 8955 panel and converter with the part #WF86FR. This would be basically an exact replacement for what you have but also is the current/updated version that is compatible with more battery types. Did you panel get damaged?

view full answer...

Answer 7

Hey Bruce! We do have step covers but none of them are specific to Suburban steps. You can potentially use the Prest-O-Fit Ruggids 3-Piece Exterior RV Step Rug Set #PR52MR (Black) or #PR32MR (Brown) but you will need to measure your steps. These are…

view full answer...

Answer 8

The correct replacement for your Klauber K01431B300 slide-out motor is the Replacement Motor Assembly for Lippert RV Slide-Outs - Klauber A-300 Model #LC157511.

view full answer...

Answer 9

Hey Thomas, we have the TORTNDR that fits your 2026 Toyota Tundra with our part number #T45MR. We also have the severe duty part #T65MR that is their part number TORTTNDR. What version of the Tundra do you have?

view full answer...

Answer 10

Hey Debbie. The RV Designer Screen Door Latch for Phillips Doors item #RD68ZR measures 2-7/8" long x 1" wide x 7/16" tall. The hand extends 2-13/16" from the body of the latch with the mounting holes spaced 2-3/8" apart. The…

view full answer...

Answer 11

Yes, the Replacement Brake Buddy Vantage Select Break-Away System #HM39327 will fit your Brake Buddy Vantage Model 39504.

view full answer...

Dimensions of RV Entry Screen Door Latch

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching