Will The Roadmaster StowMaster Tow Bar Cover Fit My Duncan Tow Bar

Question

Question:

I need a replacement cover for a towmatic II stow bar. What is the length of the one you have advertised?

asked by: Donna S

0

Expert Reply:

It does look like it's time to replace the tow bar cover! I went to the warehouse and measured the Roadmaster StowMaster Tow Bar Cover part # RM-052-3 it measures 3'8" and about 7" deep so you should not have any issues using this to stow your Duncan Towmatic Tow Bar. We have had customers say the bag is big enough to stow the safety cables and wiring on the tow bar.

expert reply by: Heather A

0

click to enlarge

Answer 1

The Demco Tow Bar Storage Cover #DM9523042 is a confirmed fit for the etrailer SD Non-Binding Tow Bar for Blue Ox Base Plates #e47ZR that you mentioned.

view full answer...

Answer 2

Yes, the Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights #RM-676 is a compatible match with the Roadmaster Direct-Connect Base Plate Kit #RM76RR. Both would be a compatible fit for your 2023 Jeep Grand Cherokee Summit as well.

view full answer...

Answer 3

The compatible baseplates for a 2023 Jeep Grand Cherokee do not have any tech listings against usage with active air shutters so there shouldn't be any interference. That being said most of the time if there is any interference you can simply…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 6

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Thanks for the information Kevin! To flat tow your 2025 Ford Bronco with a standard bumper and LED lights, I recommend the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect item #e84ZR Base…

view full answer...

Answer 9

Hi Ken! It looks like you have almost everything you need to set up your 2026 Jeep Gladiator Sahara for flat towing. The etrailer Invisible Base Plate Kit - Removable Arms #e98948 is a perfect fit and the etrailer XHD Non-Binding Tow Bar - RV Mount -…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Will The Roadmaster StowMaster Tow Bar Cover Fit My Duncan Tow Bar

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching