What Does Hitch Stair with 2 Steps # RHS2 Weigh

Question

Question:

how much do they weigh please...thanks

asked by: Jeff

0

Expert Reply:

The Hitch Stair with 2 Steps # RHS2 that you referenced weighs 19 lbs and has a weight capacity of 250 lbs. I attached a review video for this for you to check out as well.

expert reply by: Jameson C

0

Answer 1

The Brophy Scissor Step Bracket #TSSB will install on the edge of your tailgate. You will have to drill two holes for the L shaped pins. After drilling, all you have to do is simply insert the L pins into those holes and attach you Brophy steps! For…

view full answer...

Answer 2

You can measure the space between the underside of your open tailgate and the top of your hitch receiver tube to see if there is enough space for the Brophy Hitch Stair with 2 Steps #RHS2. From the top of the step's 2-inch shank up to the top…

view full answer...

Answer 3

To install the Brophy Tailgate Scissor Step Mounting Bracket #TSSB on your 2020 Toyota Tundra, you're going to: 1. Measure the distance from the center for the "L" pin to the center of the other "L" pin. 2. Now, mark center of…

view full answer...

Answer 4

You might be interested in the HitchMate TruckStep, #HE4045. The step extends out 23-1/2 inches from the face of the trailer hitch receiver. Depending on the position of the receiver and the length of the tailgate when down, this could work. We also…

view full answer...

Answer 5

Yes, the Brophy Hitch Extender #RHSE can be used with your Thule Bike Rack if you keep the weight under 250lbs. You still won't have FULL access to the bed of your truck though. I've used another product that allows me to use my truck however…

view full answer...

Answer 6

While the total extension that the Hitch Extender for Brophy Hitch-Mounted Stairs #RHSE provides is 19-1/2 inches from the closest pin holes it is not designed for use as a standard type of hitch extension. This should only be used with the hitch…

view full answer...

Answer 7

Yes, you can mount the Brophy Steel Scissor Steps, #SS04, to a truck tailgate. I recommend installing the mounting bracket on the top of the tailgate (see photo). To install the mounting bracket, you will want to use four 1/4 inch x 1-1/2 inch long…

view full answer...

Answer 8

I've attached some dimensions below to help you determine fitment of the Brophy Camper Scissor Steps #AS24 with your truck bed camper. The mounting bracket is 24" long x 1" tall (1-3/8" tall if you include the V-Clamps) so…

view full answer...

Answer 9

Not following the manufacturer's instructions to the letter will give them an excuse if something were to happen so while I can't recommend drilling the extra holes to ensure it's safely mounted, it's the only way that the steps will…

view full answer...

Answer 10

With the bottom of the door at 24 inches on level ground, the Brophy Camper Scissor Steps - 3 Steps - Steel - Diamond Tread - 18" Wide - 300 lbs #SS03 will have a very slight lean in the tread toward the RV. Unlevel ground will obviously change…

view full answer...

Answer 11

Technically, you could leave the hitch stair steps, #RHS2, mounted in the hitch while you drive. But it is going to affect ground clearance since the lower step is several inches below the receiver. I advise also adding an anti-rattle device such as…

view full answer...

Answer 12

The PortablePET Twistep Hitch Step #HE3045 would be a perfect solution for you and your dog. If you check out the picture I attached you can see that when this is extended out the step is put in a location that it will be very helpful. Since you have…

view full answer...

What Does Hitch Stair with 2 Steps # RHS2 Weigh

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching