Anti-Rattle Hitch Lock for Kuat Hi Lo Adapter # HL20b

Question

Question:

Hello, I have a Kuat hi-lo for my Kuat nv 2.0, and I wonder if the Anti-Rattle Hitch Lock for Kuat Transfer Bike Racks - HLT series would work on the Kuat hi-lo. I think it would but all I see is reference for the Kuat transfer. Thank you in advance.

asked by: Valentin

0

Expert Reply:

You can use the Kuat Hitch Lock part # HLT with the Kuat Hi Lo Adapter part # HL20B that you have. It's the same hitch pin design so it would work.

expert reply by: Jameson C

0

Answer 1

Anti-Rattle Hitch Lock for Kuat Transfer Bike Racks - 1-1/4" and 2" Hitches #HLT has a diameter of 1/2". These locks are threaded specifically to fit Kuat Transfer and NV Core bike racks that fit in 1-1/4" and 2" hitches I…

view full answer...

Answer 2

Hey James. The Threaded Hitch Pin for Thule Snug Tite Hitch Lock and Anti-Rattle Device item #TH62RE you were looking at has different threads than the item #HLT so it won't work on a Kuat bike rack. Kuat does not have an extended anti rattle…

view full answer...

Answer 3

Hey Michael, The Threaded Hitch Pin for Thule Snug Tite Hitch Lock #TH62RE is 4-1/2" long overall, with the threaded portion being 1-3/8" and the rest being 3-1/8". It is longer than most, which are often 3-1/2" or so, and I know…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Hey Nelson, welcome back and congrats on your new SUV! We get our information directly from Curt and their item #C13409 and item #C47HR hitches fit all models of the 2025 Subaru Forester including the hybrids. This is why we don't list a hybrid…

view full answer...

Answer 8

Hey Lawrence, thanks for reaching out. The Curt T-Connector #C56040 is correct for the 2025 Subaru Forester Hybrid. The factory harness plug should be in the rear cargo area behind the driver side access panel. If you remove the trunk floor covering…

view full answer...

Answer 9

Hello Wes, Great question! The only hitch that we have that will not interfere with the sensor at all for the 2025 Subaru Forester is the EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2" #306-X7391. If you go to the product…

view full answer...

Answer 10

Hey Troy! I went ahead and attached the installation instructions for the #TS64ZR as pictures below. You will have to lower the underbody panel, lower the exhaust, and remove/drill holes in the heat shield for installation. Most of the hitches for…

view full answer...

Answer 11

The main difference between these three hitches is going to be the looks and install time. EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2" #306-X7391. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13409.…

view full answer...

Answer 12

Hey Craig. The etrailer Hitch item #e83ZR has been confirmed to fit the hybrid model of the 2025 Subaru Forester. This custom fit class III hitch has a 2" receiver so it will give you the most capacity for towing a trailer or hauling an…

view full answer...

Anti-Rattle Hitch Lock for Kuat Hi Lo Adapter # HL20b

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching