Trailer Wiring Recommendation For 2017 Toyota Sienna XLE

Question

Question:

Need a trailer wiring harness for my 2017 Toyota Sienna XLE

asked by: Dan

0

Expert Reply:

The trailer wiring harness you need for your 2017 Toyota Sienna XLE is Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # C56261. I have confirmed this with Curt and have positive reviews from other customers with the XLE model about the Curt's easy installation. I have attached a video for your reference.

expert reply by: Heather A

0

click to enlarge

Answer 1

Hello Mark, Congrats on the new camper, super exciting! Happy to help get a tow package set up for your 2017 Toyota Sienna so we can get you on the road to adventure. I see that you previously ordered the etrailer hitch #e98837 and the 4 flat wiring…

view full answer...

Answer 2

To add a hitch to your 2017 Toyota Sienna, I recommend the etrailer item #e98853. This hitch is custom fit and bolts to your van with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 525…

view full answer...

Answer 3

Hey good question, Scott. The etrailer Class 3 Round Tube Hitch #e98837 is compatible with a weight distribution (WD) system because the receiver is welded directly to the crosstube. This allows the hitch to withstand the additional stress added by a…

view full answer...

Answer 4

Hey Daniel thanks for all the questions! One of them is going to be pretty easy but also disappointing, every hitch for your 2019 Toyota Sienna is going to require the panel to be removed, trimmed, then reinstalled. This is actually not as hard to do…

view full answer...

Answer 5

For your 2015 Toyota Sienna XLE you will need the T-One Vehicle Wiring Harness, #118648. This wiring harness is designed for all models of the 2015 Sienna except the SE. I have included an installation video for you.

view full answer...

Answer 6

Thank you for all of the details in your question. It looks like you have a faulty ground or some corrosion in one of your connectors. On a trailer the functions for your turn signals are also tied into the brake lights so if your right turn signal…

view full answer...

Answer 7

Any time a trailer has turn signals that work but not the brake lights it can be an interesting situation. This is because the brake lights and turn signals on trailer tail lights are on the same circuit. In this situation it is almost always a bad…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Trailer Wiring Recommendation For 2017 Toyota Sienna XLE

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching