Sterling Towbar Yoke Bushings

Question

Question:

Is there replacement bushing for the Sterling Towbar Shank Assembly 910019-40. What I see is a inner bushing and a bushing at the top end of the assembly. Please let me know.

asked by: Tom P

0

Expert Reply:

Are you possibly looking for the replacement bushing part # RM-200029-10 which is the yoke bushing? Or we have the Nylatron split bushing part # RM-200029-00. Sounds like you are in need of both of these. Let me know either way though.

expert reply by: Jameson C

0

Answer 1

We do have the Complete Repair Kit for Roadmaster Sterling Tow Bar #RM-910003-30 as the Kit #RM910003-85 is for Falcon and Blackhawk tow bars. We also have the following parts if they are damaged and need replaced on your tow bars. Inner Arm Bushing…

view full answer...

Answer 2

I pulled up the manual for a Roadmaster Sterling tow bar and the matching nut to go with the #RM-350190-20 is the #RM-350267-01 actually. A washer is required.

view full answer...

Answer 3

Hey Russ, the length of the cable of the Roadmaster Straight Power Cord for Tow Bars with Cable Guides #RM82BQ that you referenced is 78 inches. We have a longer version too with the part #RM72BQ which is 90 inches long. How long do you need?

view full answer...

Answer 4

The Universal Jam Nut for Roadmaster Towbars #RM350264-10 you referenced is indeed a genuine Roadmaster tow bar jam nut and does come with red Loctite already on the threads (pictured below).

view full answer...

Answer 5

What you would need is the part #RM910003-32 for the bolts, the part #RM-200029-10 for the bushing and then for the yoke part #RM910575 and you'd be set. There isn't an entire kit that covers all the parts you need but with these three part…

view full answer...

Answer 6

Yes, the Replacement Roadmaster Sterling Towbar Shank Assembly #910019-40 is a fit for all of the Roadmaster Sterling models. The current one they have active is the 8K #RM-576 but this same shank/stinger was used on the following discontinued models…

view full answer...

Answer 7

Hey Kenneth, the first thing you need to flat tow your 2025 Jeep Wrangler is a base plate kit like the Roadmaster part #RM-521453-5 which is a confirmed fit and easy to use. In addition to the base plates, you will also need a compatible tow bar,…

view full answer...

Answer 8

Hello Robert, thanks for reaching out. We do offer a repair kit for the Roadmaster Sterling tow bar, the Complete Repair Kit for Roadmaster Nighthawk, Sterling, and Sterling All-Terrain Tow Bars #RM-910003-30. This includes new shoulder bolts, nuts,…

view full answer...

Answer 9

Hey Tim, the correct rebuild kit for a Roadmaster Falcon All Terrain tow bar like you have is the part #RM910003-85. How many miles do you have on your tow bar you think?

view full answer...

Sterling Towbar Yoke Bushings

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching