Recommended Ladder Rack for a 2016 Toyota Tundra with TruXedo Lo Pro QT Tonneau Cover

Question

Question:

Hello Jon, you sent me a couple of e mails regarding my quest to find a ladder rack for a 2016 Toyota Tundra pick up. The truck has a 6 ft or 6.5 ft bed which is equipped with utility rails. The truck also has a Truxedo Lo Pro QT tonneau cover installed. I am trying to find a rack that will work with the Troxedo cover so I can put a light rowboat or canoe on top. We also tow a camper. I want to be able to use both the truxedo and rack at the same time so I can keep my stuff under cover while driving. Thank's for what ever help that you give.

asked by: Jim

0

Expert Reply:

Would you be able to let me know what length bed you have and if you have the deck rail system on your Tundra or not? Also, do you already have a TruXedo cover and if so which one to you have?

expert reply by: Jon G

0

Jim

8/9/2019

Hello Jon, you sent me a couple of e mails regarding my quest to find a ladder rack for a 2016 Toyota Tundra pick up. The truck has a 6 ft or 6.5 ft bed which is equipped with utility rails. The truck also has a Truxedo Lo Pro QT tonneau cover installed. I am trying to find a rack that will work with the Troxedo cover so I can put a light rowboat or canoe on top. We also tow a camper. I want to be able to use both the truxedo and rack at the same time so I can keep my stuff under cover while driving. Thank's for what ever help that you give.

Jon G.

8/9/2019

Thank you for the info about the TruXedo Lo Pro QT # TX545801 on your 2016 Toyota Tundra. Since this tonneau cover mounts inside your bed rails we actually have a few options for you to add a ladder rack. The first option is the Thule TracRac SR # TH43002XT-610 which is great because it has a 1,250 lb weight capacity, can easily slide along the rails, plus the crossbars utilize a standard T-Slot so you can use a track mount carrier like the Inno Locker Watersport Carrier # INXA445 for your boat. A more cost-effective option is the Aluminum Adarac Pro # A4001671 or the Steel Adarac # A4001678. Both of these offer a 500 lb weight capacity and they do have adjustable uprights but you need a tool to relocate them as opposed to the hand knob for the Thule system. The other thing to know is that these use square bars without a T-Slot so you wouldn't be able to use a carrier for your boat.

Answer 1

Hey Roy, great to hear from you again! Yes, we have the Inno Locker #INXA445 as well as the LockRack Series-X #LR88FR which both install into the top channels of crossbars and give you a way to secure a canoe. The Locker comes with a strap while the…

view full answer...

Answer 2

For your 1991 Ford Van with rain gutters all you need to install an Inno roof rack is the part numbers #INB165 and #INSD and you'd be set. This attaches directly to the rain gutter and gives you a great fitting square bar roof rack.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 5

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 6

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 7

Hey Jason, whenever available I would recommend going with the channel attachment for roof rack accessories including the Thule Hullavator part #TH898 as its simpler stronger, and it's basically the future of most roof rack accessories as it…

view full answer...

Answer 8

Hello Joe, Thanks for writing in! Based on the measurements you provided, the Gen-Y Glyder Shock Absorbing Ball Mount #325-GH-12001 is not the right fit for your setup. Since your Tundra's receiver measures 18 inches from the ground and your TAB…

view full answer...

Answer 9

Hello John, thanks for reaching out. Yes, we do have a Thule roof rack that will allow you to install the Hullavator #TH898 on your 2015 Subaru Forester. For that I recommend the following: - Thule WingBar Evo Roof Rack for Raised Rails - Aluminum -…

view full answer...

Answer 10

Hey Nick, yes I would say that the Curt TruTrack 2P Weight Distribution System #C67ZV is rated too high for your Jayco Jayfeather. This has a tongue weight range of 800-1,000 lbs and you'd most likely have a tongue weight around 640 to 750 lb.…

view full answer...

Answer 11

Hey Bryan, thanks for reaching out. We do offer the TracRac base rails for the 2016 Toyota Tundra long bed. Here is what you'll need: - Base Rails for Thule TracRac SR Sliding Truck Bed Ladder Racks #TH21011 What will you be using the ladder rack…

view full answer...

Answer 12

It sure is Doug and congrats on your new truck! The TruXedo Pro X15 Soft Tonneau Cover item #TX33TV has been confirmed to fit your new 2026 Ford Maverick. The TS Rails item #TH25FR are going to fit alongside the rails of the Pro X15 item #TX33TV on…

view full answer...

Recommended Ladder Rack for a 2016 Toyota Tundra with TruXedo Lo Pro QT Tonneau Cover

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching