Trailer Spindle and Hub That Uses Grease Seal 12407 and Bearings L44643
Updated 07/29/2019 | Published 07/27/2019
Products Featured in This Question
Question:
I recently purchased a small single axle trailer that was missing the hub and the spindle is trashed. The trailer is 48 inches wide with leaf springs and the axle is below the leaf spring. The metal axle is made of channel with a square spindle end welded on each side. I cant find any markings or numbers on the good hub or spindle. However, I did find the following: HUB is 5 lug 4 1/2 Grease Seal #12407 Outer Bearing #L44643 With the above info. can you recommend a replacement hub and spindle? thanks, Mike
asked by: Mike
Expert Reply:
Based on what you mentioned the correct hub you need is the # AKIHUB-545-2-G-1K as it has same bearing, seal, and bolt pattern info. The spindle you need is a BT8 like the part # TRU97FR which is for a square application.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L44643 / L44643
- Marine Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Nylon Bushing - 9/16" Inner Diameter, 7/8" Outer Diameter - 1-3/4" Long - Qty 1
- Search Results: trailer suspension parts
- Shop: Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers -3-1/8" Shackle Straps
- Q&A: How Many of the Dexter Heavy Duty Suspension Upgrade Kit K71-358-00 for a Tandem Axle Trailer
- Shop: Dexter Single Axle Standard Duty Suspension Kit - Double Eye Springs
- Shop: Timken Bearing Kit, 14125A / 25580 Bearings, 14276/25520 Races, 10-36 Seal
- Shop: Nylon Bushing - 9/16" Inner Diameter, 1.024" Outer Diameter - 1-3/4" Long
- Search Results: single axle trailer suspension parts
- Search Results: nylon leaf spring bushings
- Video: Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers Review
- Video: All You Need to Know About the Yates Wobble Roller
- Shop: Yates Wobble Roller - Heavy-Duty Rubber - 4-1/4" Diameter - 3/4" Shaft
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Q&A: Availability of a Trailer Suspension Equalizer Kit With 6-1/4 Inch Long Equalizers
- Search Results: wobble roller boat trailer parts
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer tires and wheels
- Shop: Trailer Hitch
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Wiring
- Search Results: trailer hitch
- Search Results: trailer wiring
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Shop: Suspension Enhancement
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: Measuring To Choose The Right Trailer Axle
- Article: How to Measure for Trailer Hitch Drop
on Trailer Hubs and Drums
