Would Running Boards from 2017 Chevy Silverado Fit 2008 GMC Sierra

Question

Question:

Will stock running boards off of a 2017 Chevy Silverado fit in to a 2008 GMC Sierra? Thanks in advance .

asked by: Zachary P

0

Expert Reply:

There was a large enough generation change between those two trucks that a fit from one would not fit the other. The Westin set part # 23-1955 that you referenced does fit the 2008 GMC Sierra as long as it's a crew cab.

expert reply by: Jameson C

0

Answer 1

For your 2017 Chevy Silverado 1500 the Prodigy P3 part #90195 would be an excellent option for a brake controller that is confirmed as a fit. All you need is the correct install harness, part #3016.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 5

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 8

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 9

Thanks for supporting a local business Christopher! So long as your 2012 Chevrolet Silverado is a 1500 and you need a class IV hitch, the Curt item #14301 is going to be the best option. It has a 2" receiver with a 10,000 lbs towing capacity and…

view full answer...

Answer 10

Hi Jeff, welcome back and sorry to hear that gave you so much trouble. The Redarc Tow-Pro Link Bluetooth Brake Controller #RED57AR will work on your Silverado. This plugs in-line at the back of your 7-way at the rear of the truck. You can either…

view full answer...

Answer 11

To install a brake controller on your 2017 Chevrolet Silverado 1500 LT 4x4, you will just need the vehicle specific plug-in adapter. These adapters are usually brand specific. For example, if you go with the Tekonsha Prodigy P3 brake controller,…

view full answer...

Would Running Boards from 2017 Chevy Silverado Fit 2008 GMC Sierra

Product Page this Question was Asked From

Continue Researching