Distance Between the Wheel and Frame on a 2000 Dodge Ram with Firestone Air Springs Installed

Question

Question:

how much clerance between wheel and frame

asked by: Sonja

0

Expert Reply:

The Firestone suspension system, # F2071, installs directly over the leaf springs on the axle of the truck and directly below the frame rails. The brackets overhang the spring and frame by about 1/2 inch as you can see in the instructions I have linked for you. I have also included a link to a video showing a typical installation which will give you a better idea of how the system installs.

expert reply by: Michael H

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 4

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Hi Mitchell, Great question, and I’m glad you’re double checking this before jumping in because with a 3–4 inch lift, that’s exactly where fitment can get tricky. Even though the brackets may look similar to Air Lift Ride-Rite kits, the Pacbrake part…

view full answer...

Answer 8

Hello, Russ. The Firestone Ride-Rite Air Helper Springs #F2071 is indeed the kit you need for a 1999 Dodge Ram 3500 4WD Club Cab Diesel with the long bed. Keep in mind this kit is not compatible if you have an in-bed 5th wheel or gooseneck hitch.…

view full answer...

Answer 9

I checked and the Firestone Ride Rite kit your 2001 Ford F-250 would have is the part #F2550 and the correct upper bracket is part #F5572.

view full answer...

Answer 10

Hey Bryon, Yes, even when the air springs are deflated down to the 5psi users have noted that there is still a difference in the unloaded ride quality. The severity of that difference depends on a lot of different factors, but I've mostly seen…

view full answer...

Answer 11

Installing the #F2703 on your 2012 F-250 will require moving the block in your picture. However, I'm not sure if it can be moved to the top of the jounce stop since we don't have any information on it and neither did Firestone. I recommend…

view full answer...

Answer 12

The correct size lift spacer you will need for your Firestone Ride Rite airbags depends on how much the BDS Lift Kit will lift the rear of the vehicle. If the kit lifts the rear of your truck by 3 inches, then you would want a 3 inch spacer, #F2367.…

view full answer...

Distance Between the Wheel and Frame on a 2000 Dodge Ram with Firestone Air Springs Installed

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching