Bolt Thread Size for Brophy D-Ring Tie Down Anchor # DR01

Question

Question:

Do the by chance come with metric thread patterns? I need m12 x 1.75. Thanks.

asked by: Shawn M

0

Expert Reply:

The Brophy D-Ring Tie Down Anchor # DR01 features a 5/8 x 3 inch coarse thread bolt. It is designed for use with the Backing Plate # BP1D so it is not available with a different bolt thread.

I have attached a couple short video reviews on this product that you can check out as well.

expert reply by: Chris R

0

Eric P.

6/2/2020

One of the questions answered says the bolt size is 5/8 and the other question says it is 9/16, which is it?

Reply

Chris R.

6/5/2020

The bolt is indeed a 5/8". I'm really sorry for the confusion - I've updated the other answer page you mentioned.

Reply

Answer 1

Hey Eddy! I do not know of anyone who's done that. From what I can find online it's not going to work though. The Brophy D-Ring Tie Down Anchor item #DR01 uses a 5/8" x 3" coarse thread bolt. It looks like the bed bolts on the 2018…

view full answer...

Answer 2

Hey Tim, Yes, the 4 1/2 is considered the bolt spacing in that bolt pattern. The 5 lug wheels are a bit tricky to measure, and a lot of times are measured wrong. I am going to attach a link to a help article that walks you through how to measure a 5…

view full answer...

Answer 3

Hi Stephen; the thread on the removeable eye bolt is 3/8". The #348819 anchor/shank is 5/8".

view full answer...

Answer 4

Hey John, congrats on the new truck. Yes, the Brophy Slide In Camper Tie-Downs - Extra Clearance item #HSAB can be used with your 2026 Ram 3500 dually. What turnbuckles did you use previously with your 2021 Lance 865?

view full answer...

Answer 5

Hello Mark, thanks for getting in touch. The 145/R12 tires and the 4.80-12 are similar but not exactly the same size. The 4.80-12 tires are 4.9" wide and 20.7" in diameter when fully inflated. The 145/R12 tires are going to be about…

view full answer...

Answer 6

Hi John; personally I would use the etrailer E-Track Backing Plates #e96RR or #e66RR to secure the etrailer Horizontal E Track #e62VR. My next choice would be the bolts and washers, screws after that if you really want to go that route. It will be…

view full answer...

Answer 7

It may be possible to upgrade your 13" wheels and tires to 15". We do carry 15" five lug wheels. So as long as the hubs on your trailer use a standard 5 bolt pattern, like 5 on 4-1/2", then you can mount 15" wheels no…

view full answer...

Answer 8

The speed rating for Kenda Karrier tire part #AM39053 is 81 MPH. That is the maximum speed recommended for these tires. Most tires have a M, L or J on the sidewall of the tire that indicates the speed rating. This particular Kenda tire has a M…

view full answer...

Answer 9

The plug you have by your spare tire is the correct wiring harness for you to add a 4-way like #C55265. Your truck shouldn't require any any extra fuses or relays. For a 7-way you should be able to use the Hopkins Endurance 5th Wheel/Gooseneck…

view full answer...

Bolt Thread Size for Brophy D-Ring Tie Down Anchor # DR01

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching