Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this Brophy bolt-on half inch diameter D-ring tie-down anchor. Has a 2,000 pound working load limit. Now this tie-down anchor provides a nice solid point to secure your cargo with straps or bungee cords. Now to install this, it will require a backing plate for installation, which we do sell separately on our website. Goes by a part number of BP-1D.
And just to show you what we're talking about, I pop up an insert there and if you look closely at that backing plate, you'll notice it has a welded on nut on the underside of it, and that'll allow this to thread into it. This bolt would be. Now if you notice, it does come with the large washer that would go on and then put it into the backing plate screws in. What's nice is this D-ring, as you can see, will rotate 180 degrees so that you can attach straps from multiple angles. This is a zinc-plated steel construction that resists corrosion, retains its strength through repeated use.
And as we mentioned, the built-in bolt is nice and easy for easy installation. A few specs on this part, the maximum load or brake strength is 6,000 pounds, but you want to go by the safe working load limit, which is a third of that, so it's 2,000 pounds. The ring diameter, the diameter of the ring itself is a half an inch. The opening on the ring is 2 1/4 inches across. Now the bolt.
Lemme get a ruler out here. The length of the bolt itself, you can see is right at 3 inches. The diameter of the bolt is gonna be right at 5/8 inches. And the thread size on this bolt is 5/8 inch by 11 thread size. But that should do it for the review on this Brophy bolt-on half inch diameter D-ring tie-down anchor with the 2,000 pound working load limit.
.
nice piece
Perfect
Great Product
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.