Weld on a tie-down point where your load sits, not where the trailer came with loops. This forged steel D-ring and weld-on clip give straps, chain, and hooks a tough place to connect, so you can cinch down without reworking tie-downs.
If you're hooking up wherever you can, you end up with off-angle pulls that twist hooks, shift the tie-down path, and make you reposition straps just to get the load settled. Welding this D-ring assembly onto your trailer lets you create a dedicated anchor point where your cargo sits, so your tie-downs start from a better line instead of fighting the layout you already have.
The included weld-on clip gives you a dedicated mounting point for the D-ring once installed. That means you can add tie-down points to match your load style, whether you're securing equipment, materials, or bulky gear that never seems to land near the factory tie-downs.
Tie-down hardware sees repeat tension, road vibration, and the occasional hard cinch. A forged ring is built to take that kind of repeated use without changing shape as quickly as many stamped or cast rings do. If you haul often, that helps your anchor point stay consistent over time instead of slowly deforming and changing how your hooks sit.
This assembly is stored with oil to help keep rust from forming during storage so the steel stays clean for welding. It's left unfinished from the factory because most installs are welded and then finished by you, which also means you are not stripping paint or powder coat before you start.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everyone. Steve here with Etrailer. Let's take a look at our very own Etrailer forged steel D-ring tie-down anchor. Now this uses a weld-on clip, and it's a 5/18th inch thick rated at 6,300 pounds working load limit, and that is also stamped on here as well. So obviously, you wanna make sure you get this installed by a qualified welder. Make sure you know what you're doing if you're welding it yourself.
Make sure that it's got a nice, strong hold. Now this is gonna be great for heavy-duty cargo control. Maybe it's equipment trailers, construction, flatbeds, haulers, anything that's got a really big load, this is a great option for you. And then, of course, you're gonna attach your chain, straps, whatever. Now this is an oil-immersed and unfinished, so it's gonna stay weld-ready.
It's been stored in oil to protect against rust and steel. That way, it's nice and clean for welding. So just keep that in mind. And this, again, will be a great option for you. We do sell these quantity one, so make sure you're getting a couple of 'em if you need more than one.
Now, the forged steel means it's gonna be super strong for years to come. It's not gonna deform or anything like that. It's a lot more resistant to those kind of things than your standard steel. Now as far as some dimensions, outside of D to the outside of D, about four and 1/4 inches long. Same this way.
The inside opening is roughly two and 7/8th inches wide by about three inches that way. And again, 5/8th inches thick. So again, folks, quantity one. This is our Etrailer forged steel D-ring. I'm Steven. Thanks for watching.
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.




Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.