bing tracking image
Q & A Icon

Should the L-Brackets On a Fastway e2 Weight Distribution System Move Back and Forth  

Updated 10/20/2025 | Published 06/23/2019

Question:

I have the e2 hitch round bar system. Where the round bar turns flat, it lies on the “L” -late. Should this “L” plate have forward n back movement? Or should it be so tight as not to move ? Thx

1

Helpful Expert Reply:

The l-shaped brackets you are referring to on a Fastway e2 Weight Distribution System like part # FA94-00-0600 should not move back and forth. If they do move back and forth then you will need to make sure they are torqued correctly (75 ft. lbs.) and that they are the correct distance back from the coupler (no more than 30").

expert reply by:
1
Conner L
Rich profile picture

Rich

10/19/2025

That same L bracket has 5 holes in it..mine is currently in the top hole..can I move it one hole down to get extra height to get out of a campground? ..and can I travel with it that way?

Jerred H. profile picture
Etrailer Expert

Jerred H.

10/20/2025

@Rich You sure can! It will be safe to travel that way as well.
Jerred H. profile picture
Etrailer Expert

Jerred H.

10/20/2025

@Rich Yes, you can. It will be safe to travel that way as well.
Rich profile picture

Rich

10/20/2025

@JerredH.. Thank you!
See All (4) Replies to Rich ∨

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>