Is There An Equal-i-zer Weight Distribution System For A Truck With 6 Inch Lift
Updated 02/28/2024 | Published 06/20/2019
Products Featured in This Question
Question:
Do yall sell this hitch for a truck with a 6inch lift and 35 inch tires?
asked by: Johnny S
Expert Reply:
Yes, if you have a lifted truck then you would want to purchase the weight distribution system and shank separately as this will then allow you to obtain a shank that has the correct amount of drop for your truck without having to purchase an extra one. For starters, you will need the Equal-i-zer Weight Distribution System part # EQ37101ET and then you can obtain one of the following:
Equal-i-zer Weight Distribution Shank - part # EQ90-02-4200 (4" Drop)
Equal-i-zer Weight Distribution Shank - part # EQ90-02-4300 (6" Drop)
Equal-i-zer Weight Distribution Shank - part # EQ90-02-4400 (9" Drop)
In order to find out which one is correct (I suspect the 6" or 9" drop shank) you will need to measure from the top, inside edge of your trailer hitch to the ground and then subtract the distance from the ground to the bottom of your trailer coupler while level.
Product Page this Question was Asked From
Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 10,000 lbs GTW, 1,000 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Trunnion Bar
- Fits 3 Inch Frame
- Fits 4 Inch Frame
- Fits 5 Inch Frame
- Fits 6 Inch Frame
- Shank Not Included
- Top-Mount
- Fits 2 Inch Hitch
- Allows Backing Up
- 800 lbs
- 900 lbs
- Equal-i-zer
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Equalizer Weight-Dist Shank - 2" Hitch - 12" Drop x 15" Rise - 600 to 1,400 lbs TW
- Shop: Equal-i-zer Wt Distribution Shank - 12" - 13" Rise, 9" Drop - 600 to 1,400 lbs TW
- Shop: Vehicle Lights
- Q&A: Solution for Blue Ox Weight Distribution System That Needs More Drop to Tow Trailer Level
- Q&A: What Kind of Weight Distribution Shank Will Give a 9 Inch Drop
- Q&A: Drop Shank Recommendation for Equalizer Weight Distribution for Taller Tow Vehicle
- Q&A: Replacement Shank for Equal-i-zer Weight Distribution System to Provide More Drop
- Q&A: Which System Is Best Between The Curt TruTrack & The Equal-i-zer Weight Distribution System?
- Shop: Replacement Spring Bars for Equal-i-zer Weight Distribution Systems - Qty 2 - 400 lbs TW
- Shop: Replacement Spring Bars for Equal-i-zer Weight Distribution Systems - Qty 2 - 1,200 lbs TW
- Shop: Replacement Spring Bars for Equal-i-zer Weight Distribution Systems - Qty 2 - 600 lbs TW
- Shop: Equal-i-zer Weight Dist Shank - 12" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Q&A: Determining The Correct Drop Shank For An Equal-i-zer Weight Distribution Hitch
- Q&A: Drop Shank Recommendation for Husky Weight Distribution for Ram Truck Towing Camper
- Shop: 1141/1003/1156 LED Bulb - Single Contact Bayonet - 360 Degree - 320 Lumens - Warm White - Qty 2
Pete Z.
2/24/2024
So I measured the inside top of my truck hitch and it’s 28 inches. I have a dodge ram with a 5 inch left and 37 inch tires. The trailer coupler is 17 1/2. So that’s technically a 10 1/2 drop. I’m guessing the 9 inch drop should suffice or do I need to go another route Thank you. Pete