How to Wire Clearance Lights for the Optronics Trailer Light Kit for Trailers Over 80" Wide
Updated 06/14/2019 | Published 06/13/2019
Question:
how to connect wiring for side marker lights they have two spots to plug into supplied is two black wires i suppose is ground for each light is there another wire to plug into light that would then go to the blue connecter does it matter which wire goes in which hole
asked by: Bob D
Expert Reply:
The 2 black wires for the side marker lights that come with the Optronics Trailer Light Kit # TL16RK are used to power the lights. The clearance lights are actually designed to ground using the mounting hardware. If you check out the attached picture you can see that there is a metal strip that runs from an eyelet to where you will use your mounting hardware. So you will simply connect the black wire to the hole that won't be touching that eyelet.
This is also addressed in the attached review video.
Product Page this Question was Asked From
Optronics Trailer Light Kit for Trailers over 80" Wide - Submersible - 25' Wiring Harness
- Trailer Lights
- Tail Lights
- Brake/Tail/Turn
- License Plate
- Marker
- Rectangle
- Surface Mount
- Submersible Lights
- Incandescent Light
- 8L x 3W Inch
- Amber
- Red
- Optronics
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Video: Review of TecNiq Trailer Lights - Passenger Contoured 8 Function Box Tail Light - TN62XR
- Search Results: stl36rpg
- Search Results: 9651p
- Shop: LED Tail Light for Trailers Over 80" Wide - 7 Function - Submersible - 17 Diodes - Passenger
- Shop: LED Tail Light for Trailers Over 80" Wide - 8 Function - Submersible - 23 Diodes - Driver Side
- Search Results: trailer light wedge
- Shop: Thinline LED Clearance and Side Marker Light w/ Chrome Bezel - Submersible - 3 Diodes - Red Lens
- Video: What to Know About the Thinline LED Clearance and Side Marker Light w/ Chrome Bezel
- Shop: TecNiq Contoured Seven Function Box Style Tail Light - Passenger Side
- Shop: LED Tail Light for Trailers Over 80" Wide - 8 Function - Submersible - 23 Diodes - Driver Side
- Shop: Optronics LED Combination Trailer Tail Lights - Submersible - 40 Diodes - Driver and Passenger Side
- Video: An In-Depth Look at the LED Tail Light for Trailers Over 80" Wide
- Q&A: Recommended Replacement 5-Pin Wishbone Harness for a Boat Trailer
- Video: A Closer Look at the Peterson Clearance or Side Marker Light Kit
- Shop: RV Designer RV Socket Adapter Harness - 4 Way Flat to 7 Way RV
- Video: In-Depth Review of the LED Tail Light for Trailers Over 80" Wide
- Video: Review of TecNiq Trailer Lights - Drivers Side Contoured 8 Function Box Style Tail Light - TN42XR
- Video: Detailed Breakdown of the LED Tail Light for Trailers Over 80" Wide
- Q&A: Best Replacement for a Wesbar Tail Light 271594
- Q&A: Can 2 Pin Harnesses 9651P and HM47965 Power Optronics Trailer Taillight Kit STL39RPG
- Q&A: Matching Connector for the Optronics Trailer Taillights # STL36RPG and # STL37RPG
- Q&A: Sourcing 2-Pole Wiring Extension 9651P or Similar Alternative
- Q&A: Recommended Wishbone 4-Way Trailer Wiring Harness with 14 Gauge Wire
- Q&A: How To Wire A 7-Way Trailer Connector With A Wishbone Trailer Wiring Harness
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer wiring
on Trailer Lights
