Matching Connector for the Optronics Trailer Taillights # STL36RPG and # STL37RPG

Question

Question:

Do you sell a mating connector for the Optronic STL 37RPG and the STL36RB trailer tail lights.

asked by: Tim D

1

Helpful Expert Reply:

For the Optronics trailer taillights # STL36RPG and driver side # STL37RPG we do carry the style of connector it uses with the part # 9651P. You'd cut the harness in half and wire either side to your trailer wiring so that you can easily connect to the lights mentioned.

expert reply by: Jameson C

1

Answer 1

Hey Rick. Unfortunately that's correct the Wesbar Tail Light 271594 has been discontinued. Our best option for replacing it is the LED Trailer Tail Light item #STL36RB for the passenger side and item #STL37RB for the driver side. The Wesbar light…

view full answer...

Answer 2

What you're looking for is the 25 Ft 5-Way Trailer Wiring Harness #A25W5B. This is the 5-pin connector made of 16-18 AWG wires. I know you were looking for only a 5' section, however the odds are that if you're just needing a small…

view full answer...

Answer 3

Hey Mike, we have what you are looking for with the part #HM47965 which is basically the exact same 2-pole wiring extension as the 9651P but that Spectro part number is no longer available so we can't get it.

view full answer...

Answer 4

The 2 black wires for the side marker lights that come with the Optronics Trailer Light Kit #TL16RK are used to power the lights. The clearance lights are actually designed to ground using the mounting hardware. If you check out the attached picture…

view full answer...

Answer 5

For powering the Optronics trailer taillight part #STL37RPG there would be no difference between the two 12 inch 2 wire loops part #9651P and the #HM47965. They are both 12 inches long and have the exact same two pin connectors.

view full answer...

Answer 6

I recommend replacing your Tail Lights with the Drivers #STL37RPG and Passengers #STL36RPG lights as the Wesbar Lights and lenses are obsolete. The Optronics lights above will both use the same Tail Light Lens #A39RB if either side were to become…

view full answer...

Answer 7

For an LED replacement that is nearly identical to the Wesbar 105826 light you can use #STL36RB for the right side and #STL37RB for the left side. There are also versions that have a plug instead of just bare wires. For the right side use #STL36RPG…

view full answer...

Answer 8

I do have an option for you but none of our trailer wiring harnesses we offer come with that heavy duty of a wire. The only 4-way wishbone kit we offer 40' long is the 4-Way Wishbone Trailer Wiring Harness part #A40W42B which has 20 gauge wire. I…

view full answer...

Answer 9

The best way to wire a 7-way plug on your trailer that has a 4-way wishbone harness is to use a junction box like part #38656 from Spectro. The wishbone harness has two separate running light brown that connect both sides of the trailer running…

view full answer...

Answer 10

It is normal to have continuity between the brake(blue) wire and ground(white) wire. The electric trailer brake is an electromagnet when it has power it attracts to the steel inside the hub/drum. If you are having issues with your trailer brakes…

view full answer...

Answer 11

You are correct that the Optronics Thin Line Sealed LED Marker/Clearance Light #MCL-91AK that you referenced will require a jumper ground wire to be run to a metal portion of your trailer frame if it is installed on a plastic surface. You will want…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Matching Connector for the Optronics Trailer Taillights # STL36RPG and # STL37RPG

Products Featured in This Question

Continue Researching