Motor On MaxxAir MaxxFan 4900K Roof Vent Will Not Shut Off When Lid Is Closed
Updated 05/29/2020 | Published 06/11/2019 >
Products Featured in This Question
Question:
My daughter ordered 2 new operators and tried both on my max air fan and it makes a grinding noise when it gets to the closed position. I have to turn the switch off. It doesnt cut off like it should. the old operator was comming apart so i ordered 2 new operators - 1 for a spare. the fan is on a lakota horse trailer. maxfan smoke 4900K serial 20130-03-4900K-0004 etrailer sent part # 10A20281K-1AF Is this the correct part? what could be the problem?
asked by: Ty S
Expert Reply:
I spoke with MaxxAir about the issues you are having with your MaxxAir MaxxFan Roof Vent and they informed me that the gears inside the lift motor have gone bad so you will need to replace this with the Replacement Lift Motor for Maxx Fan Plus Roof Vent part # MA10-20270. I was also able to confirm that the Replacement Operator Mechanism for MaxxAir MaxxFan Plus or MaxxFan Deluxe Roof Vents part # MA10-20281K-1AF is correct for you so that is not the issue.
Product Page this Question was Asked From
MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered Lift - 10 Speed - White
- RV Vents and Fans
- Vent
- Roof Vent
- Powered Lift
- 12V Fan
- Reversible Fan
- Plastic
- White
- MAXXAIR
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: lippert stabilizer jack
- Shop: Lippert Scissor Stabilizer Jacks w/ Handle - 24" Lift - 10,000 lbs - Qty 2
- Search Results: rv skylight
- Shop: MaxxAir FanMate RV and Trailer Roof Vent Cover - 26-1/2" x 18-1/8" x 10-1/4" - Black
- Shop: Leveling Scissor Jack Set - 24" Lift - 10,000 lbs - QTY 2
- Shop: Replacement Operator Mechanism for MaxxAir MaxxFan Plus or MaxxFan Deluxe Roof Vents
- Shop: Replacement Dual Diverter Valve Assembly for B&B Nautilus P3/P4 Panels - 1/2" MPT
- Search Results: coleman mach ac
- Search Results: coleman mach 10
- Shop: Rubber Wiper Seal for RV Slide Outs - Channel Mounted Press-In - 30' Long
- Shop: Lippert Replacement Standard Bearing Block Kit for RV In-Wall Slide-Out
- Search Results: rv vents and fans
- Search Results: trailer hitch
- Video: Review of Maxxair RV Vents and Fans - Enclosed Trailer Parts - Operator Mechanism - MA10-20281K-1AF
- Search Results: maxxfan 4900k
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Video: A Look at the Power Mountain Tallboy 6 Ton Off-Road Bottle Jack with a Military Cargo Trailer
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Will Skylight # SR89YR Work On 1-1/4" Thick Roof Of 2018 Lance 1575?
- Shop: Trailer Wiring
- Article: 5 Things to Know About Weight Distribution Hitches
- Shop: Suspension Enhancement
- Video: Feature Review - Big Truck Big RV Trailer Jack Foot Scale with Tongue Weight Gauge
- Video: Replacement Dome Assembly for Ventline Ventadome Trailer Roof Vent Spec Review
- Shop: Brake Controller
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Shop: Base Plate for Tow Bar


Paul L.
5/26/2020
My Model is the 4700K. My problem is that the lift motor continues to run when the cover is open. The lift motor stops only after 8 steps of the cover. Is the problem the lift motor or the circuit board? Thank you