Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replace your worn out channel-mounted wiper seal before water damage creates a costly headache. This durable weather stripping is easy to install into existing track. The bulbed blade helps grab the slide walls, so it folds out properly.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody. This is Jeff at etrailer.com. Today I'm gonna take a look at this 30 foot long pressing rubber channel mounted wiper seal for your RV slide out. Now this is a rubber RV slide out seal that is used to prevent water and pest from getting into your living area on your RV. This part here will replace the seal that's originally used on cable operated slide out systems, commonly found on the Forest River and Keystone brand RVs. Now the advantage of this seal here it uses a reinforced insertion stem and a wiper stem junction point to ensure that the seal will stay in place, does not tear.
Has a crown tab right here to increase wiping strength, provide a nice finished look. And over on this end, they use a ball tipped wiper to improve wiping action, and make sure that the seal moves with the slide out box. This is made of an EPDM dense rubber construction, so won't shrink, crack or fade over time, and it is resistant to UV damage. And it is a very easy installation, as we mentioned, you just push onto your existing track. This stem right here goes into your track there and then trim any extra seal.
Now, they do recommend a mallet or a tucking tool for best results. Size on this, as we mentioned, it's 30 feet in length. The width on it is two inches wide, and the total height of it is about three quarters of an inch tall. And this part is made in the USA. But that should do it for the review on this 30 foot long pressing rubber channel mounted wiper seal for your RV slide out.
.
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
Ratings & Reviews

Jenny N.
2/28/2023
I have reached out to the manufacturer about the seal and I have a few questions that I wanted to ask. Is the issue that you are having occurring on all sides of the slide box or just on one side? I see that you are in California however are you currently in or stored the RV where it is has been extremely cold?

Brad
3/9/2023
I apologize for the late response. I replaced the outside left and right wiper seals, and parts of the left & right inside pieces. The original inside pieces were only partially ripped. The top seal is fine, its a different type. The issue has existed since day one. The seals were replaced during warm to hot weather. The only portion of the seal that flips the correct way during operation of the slide is the one that sweeps by the small window at the rear side of the slide. The window frame sticks out enough to get it going the correct way. I have to manually push the seal in to close the slide fairly easy and pull the seal out to open the slide pain in the butt. I have to bring a ladder when we go camping in order to reach the full height. The thing thats so frustrating is that the seal is heavy duty and superior to the OEM seal, but just doesnt perform the way it should. BTW, not sure if I mentioned it prior, but I called the manufacturer twice and got no response.

Jenny N.
3/9/2023
The manufacturer is happy to replace the 30-foot-long rubber wipe seal to their latest version at no cost to you. I will email you to make arrangements on shipping.

Katrina B.
5/26/2022
I have spoken with the manufacturer and they have stated that while it is possible to tear the seals, in all of their testing, its required a sharp instrument to do this. The difference in their product opposed to other rubber wiper seals, is the materials that are used in both. For Steele Rubber Products, they use 100 EPDM rubber. Most other companies will use a thermoplastic of two different durometers the ion stem is a hard plastic and the wiper is soft. Which is where the material will repeatedly rip, tear and fail. This is why Steele Rubber Products has engineered these wipers, specifically to resist tearing. From the thickness of the joint to the use of EPDM rubber. Which are both significant improvements over the original seals. If you could please send some photos of your damaged wiper seal, we would be more than happy to assist you in a solution.

Dale B.
2/1/2023
The rubber seal did not work for me it was to stiff and would not allow the slide to go in and out smooth . It pulled itself out of the holding slot so I removed it completely and use a foam seal in place of it. It is a good design and may work for some but my slide did not have enough clearance for it to fold in and out when moving
Do you have a question about this RV Slide Out Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.





Ray
3/8/2023
Terrible Product. Had to remove it and order a more traditional wiper seal. This was too thick to flex when the slide was moved in or out. In the end one of my slide motors needed replacement. While I can’t say this seal was the cause, it certainly contributed to the problem. Great idea, just overboard on execution.