Product Experts Available Now!
Call 1-800-940-8924
CE Smith Rear Hanger Bracket for Trailer Slipper Springs - Galvanized Steel - Bolt On - Qty 1
(66 reviews)
Price: $17.27
In Stock
We'll connect you with nearby partnered installers who know this exact setup.
CE Smith Rear Hanger Bracket for Trailer Slipper Springs - Galvanized Steel - Bolt On - Qty 1
Part Number: CE14017G
In Stock
$17.27
Retail:$27.61
You Save: 37%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (66)
- Q & A (0)
- Photos
CE Smith Trailer Suspension Parts - CE14017G
Highlights
- 4-1/4" L x 2-1/4" W x 1-3/4" T: Sized to secure the slipper end of a 1-3/4" wide spring.
- Bolt-On Rear Hanger: Mounts under the trailer frame with no welding needed.
- 7-Gauge Galvanized Steel: Hot-dipped zinc coating resists rust and corrosion for long life.
- 1-7/8" Inside Width: Provides proper fit for standard slipper spring ends.
- Works with Flat or Hook Style Ends: Fits both common slipper spring designs.
- 7/16" Mounting Holes: Accepts bolts sized to your trailer’s frame thickness.
Features to know about
Solid Mounting Point for Slipper Springs: 7-Gauge Galvanized Steel Holds Strong
A secure rear hanger keeps your suspension steady mile after mile. This CE Smith bracket gives the slipper end of your spring a solid anchor point with heavy-duty 7-gauge galvanized steel construction. The hot-dipped zinc coating—about 3 to 5 mil thick—protects against rust and corrosion so the connection stays strong whether you’re towing through rain, salt, or rough weather.
Simple, No-Weld Setup: Bolt-On Design Installs Under Your Frame
When you’re replacing old suspension parts or building a new setup, you don’t need to break out the welder. This hanger bolts directly to the underside of your trailer frame for an easy, clean install. It saves time and keeps things straightforward without sacrificing strength. The 7/16" diameter mounting holes are ready for hardware that matches your frame thickness, giving you a tight fit with no guesswork.
Built for Proper Fit: Sized for 1-3/4" Wide Slipper Springs
Getting the right fit means smooth spring movement and even load handling. This rear hanger is made for the slipper end of a 1-3/4" wide spring, with an inside width of 1-7/8" for free movement and proper alignment. It works whether your spring has a flat or hook-style rear end, keeping it seated just right every time.
Compact Strength Where You Need It: Designed for Tight Spaces
Space under the frame is usually limited. At just 4-1/4" long, 2-1/4" wide, and 1-3/4" tall, this hanger tucks in neatly without compromising strength or clearance. Its shape and thickness make it a sturdy connection point that holds up under load while keeping your suspension geometry correct.
Specs
Application
- Application: rear of slipper spring
Dimensions
- Overall dimensions: 4-1/4" long x 2-1/4" wide x 1-3/4" tall
- Inside width: 1-7/8"
Quantity
- Quantity: 1 bracket
14017G 7-Gauge, Galvanized Steel Replacement Rear Slipper Spring Hanger Bracket by CE Smith
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
Ratings & Reviews
4.8
66 reviews
by:
Scott
08/23/2026
Totally satisfied with both the product and the service. Slipper spring hanger bracket is very rugged, more than the original broken one on my small boat trailer. Fit was perfect. Shipping was quick and tracking was good. Can't ask for more.
by:
Jack
11/22/2025
Heavy duty galvanized. Bolted in as planned. They are holding the spring just right. No welding required!
by:
Brendan
10/22/2026
It fit perfectly and works the way I needed it to work!!
It is solid and should hold up well for my boat trailer.
It is solid and should hold up well for my boat trailer.
by:
Bruce
09/05/2025
Exactly what I needed. Paid for expedited shipping and received the product in a timely manner.
by:
veteran kayaks
04/30/2025
Need to be stronger as do the axels. Despite being under the max load for the Malone mega sport and not traveling at over 60 mph when towing I have now had 2 1500lb axels and this is the 3rd set of hanger brackets as they crack on the sides and the axels bend partly die to poor conditions of the roads but also due to under engineered for the job and weight intended. Apart from the the mega Malone megasoort has held up. Suggest a better design for the mega sport as it’s intended for outfitters not occasional use.
by:
Kevin
03/11/2026
Great product
by:
D G
05/24/2017
Parts came on time and as represented on the website. Looked all over for these brackets for my boat trailer. Your company was the only site I found with them.
Thanks, looking forward to doing business again.
Thanks, looking forward to doing business again.
by:
Michael
10/31/2021
I used etrailer during my restoration of my 1965 Travler Comet runabout boat. The trailer was in poor shape requiring all new suspension and hardware. etrailer had everything I needed. Easy to find and order. Great service and quick shipping.
by:
Kevin
03/30/2018
Quality of the coating is very poor. Extremely rough with high peaks/pits. That make the slip spring not slide and keep the brackets from mounting flush. I will have to sand off the coating and get them powder coated or something to keep them from rusting. Highly disappointed. Etrailer and their support was fantastic as always with extremely fast shipping and answering my questions quickly.
by:
Robert
09/27/2019
I had bought an old boat & trailer only to discover the trailer spring mount was damaged. I could not find an original bolt on replacement and did not have access to a welder. This bracket allowed me secure the spring and only had to drill 1 new mounting hole.
by:
Bob
09/27/2021
Order was lost in shipping. I got ahold of etrailer and they shipped another one right away. I’ve dealt with etrailer in the past and would highly recommend them. They have good products and Great customer service!
by:
Dale
04/12/2018
Evidently...UPS tracking was incorrect saying it went to New Hampshire! As it left Phoenix last night heading here...I've never seen that happen before! I know it's not your fault but I have had a lot of issues with UPS and refuse to use them if at all possible. The parts got here on time and I got it all installed. Went well. Now I got my water trailer back on the road ...without it we almost ran out of water at our home so it was critical to get it up again after I broke a spring!
by:
Michael
04/14/2019
I purchased this to allow me to lift/shim the slipper spring away from the trailer because the tire was hitting the fenders.
by:
Amy
08/06/2022
This was the exact replacement for my kayak trailer suspension. It’s been in use for a year — so far, so good!
by:
Fishnot
06/12/2020
Not much to say about these as they really don't do much. Fit well and aligned well on my trailer.
Fishnot
6/14/2021
Again, not much to these. Still working fine with not much wear.
by:
Robert
03/11/2018
Order was processed quickly, shipped the following day. Basic shipping is a bit slow, but the tracking feature is helpful. Parts arrived, installed on trailer and I'm back on the road.
by:
Dave S
05/18/2017
All Parts for trailer suspension fit perfectly. Shipping was lightening fast. Excellent products and service.
by:
Ryan
09/17/2021
Very high quality parts.
Simple web site that was very easy-to-use with great details of each part.
Their tracking system is second to none. Lets you know every single movement of the product from packing to delivery.
Simple web site that was very easy-to-use with great details of each part.
Their tracking system is second to none. Lets you know every single movement of the product from packing to delivery.
by:
Ken
03/15/2018
etrailer.com had the hard to locate parts that I needed and got it sent out the same day I ordered it. Delivery was fast which minimized the down time of my boat trailer. etrailer.com got me back on the water with the parts I needed.
by:
Dan G.
02/02/2017
Excellent quality and very fast shipping.
Thanks etrailer!!!
Thanks etrailer!!!
by:
David
05/30/2016
Exactly what I needed. Great price and fast service. If you own a trailer this is the place when you need parts.
by:
Matthew
06/18/2018
Product arrived as scheduled and as described. We have ordered from etrailer a few times and never had any issues with their parts.
by:
James
08/22/2019
Excellent purchase. Heavy duty, and galvanized so it won't rust. Arrived quickly.
by:
Herman
08/18/2022
staff was very helpful. Products are great quality. delivery of the order on time. Fantastic tracking system and they follow up on your delivery. Just great service and customer care. highly recommend them!
by:
Larry
08/19/2015
Exactly what I was looking for. Second time customer, both times completely satisfied. Great prices,selection, and followup. I will be ordering from e-trailer again... Suggestion: how bout a coupon or incentive for return customers? Thanks again...
25
66
true
Show More Reviews
See what our Experts say about this CE Smith Trailer Suspension Parts
- Bolt On Slipper Springs for 1-3/4" Wide Slipper Springs on a Small Single Axle TrailerThe only bolt-on hangers we have for 1-3/4" slipper springs come from CE Smith: - Front # CE14016G - Rear # CE14017G Attached are some review videos for you to check out!
view full answer... - Recommended Slipper Spring and Hanger to Make Trailer FunctionalWe unfortunately do not have exactly the spring you are looking for. What I recommend is getting the 3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8" Long # SP-178275 and moving your rear hanger forward because you will be within 1/4 inch of where your axle would have been with this spring. Then you will be able to replace springs as needed and still support your sailboat properly for transport. If you want a bolt on slipper spring hanger for the rear, I recommend...
view full answer... - Are there Bolt-On Hangers for Trailer Leaf Spring SuspensionWe do have a couple of bolt-on spring hangers # CE14017G and # CE14016G but they are designed for slipper springs and not double-eye springs like # e77SR. Its not likely that professional welder would charge that much. You might be able to find one locally via an iron workers union near you. For u-bolts for your 1-1/2 inch square axle you can use # SP01-120 for 2 u-bolts and 4 nuts. For a u-bolt plate you can use # 115983. For a hanger kit you could use # APS1. Now what you could do is...
view full answer... - Recommended Bolt On Hangers For Aluminum Frame TrailerSince you've got an aluminum frame trailer, I understand why you're looking for a bolt on solution. The only available bolt on hangers we have available would be the # CE14017G and # CE14016G but they are designed for slipper springs and not double-eye springs like # e77SR you were looking at. If you went this route you would want to use something like the # SP-040275 as your springs, which have a 3700-lbs capacity. This would be the best solution available for your new aluminum trailer,...
view full answer... - Parts Needed For Adding 1,000LB Slipper Springs To a Cart With No SuspensionYou will need 2 of the Front # CE14016G and Rear # CE14017G hanger brackets to attach 2 of the 2-Leaf Slipper Springs # SP-177275 to your cart. You will need 2 of the Zinc Shackle Bolts # TRFA73Z916DLNZ to attach the leaf springs to the front hanger. If you can tell what shape and size axle you have I can help you find the U-Bolt Kit you need. We have some like the 1-1/2" Square # CE23102 or 1-3/4" Round # CE23000 depending on the size of your axle.
view full answer... - Do Slipper Spring Rear Hangers Require BushingsNope, the slipper spring rear hangers like the part # CE14017G do not require the use of a bushing between them and the spring. I attached a picture that shows how it will look when it is installed.
view full answer...
- Can Trailer Suspension Hangers be Bolted OnThe top holes you see in trailer suspension hangers such as Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 1-1/4" Rear Item # APS3 are for button welds and not bolts so these hangers should not be bolts on. The problem is that with a weld the hanger is fixed and cannot move. With bolts no matter how tight you make them the bolt will always be smaller than the holes in the hangers and given the forces applied could cause the hangers to shift and throw off the alignment...
view full answer... - Replacement Rear Hanger for Shorelandr Boat Trailer with 1-3/4 Inch Wide Slipper SpringsIf you are looking for a weld-on option we have 1 rear slipper spring hanger that fits 1-3/4 inch wide trailer suspension slipper springs. It is # 115706S. Please note that any welding should be performed by a professional welder. For a bolt-on option we have # CE14017G. I have also included a link to our help article on slipper spring suspension for you.
view full answer... - Hanger Dimension Recommendation for Installing Slipper Springs SP-179275Yes, you would want the hangers used for installing the Slipper Springs part # SP-179275 that you referenced to be 23-1/8 inches apart when installing these springs on your trailer. I attached a review video for you to check out and a help article on slipper suspension systems as well.
view full answer... - Slipper Springs and Slipper Bracket for a 28.5 Bolt to Bolt Trailer MountI recommend using the 4-Leaf Slipper Spring w/ Flat End for 3,700-lb Trailer Axles - 30" Long Item # SP-040275, for your trailer leaf springs that are 28.5 from center of bolt to center of bolt with 3,000 lbs trailer. You will need a slipper spring hanger bracket # CE14017G. This bracket is a simple bolt on adapter that changes the rear mounting style for the leaf spring. I have linked a video to show you how the brackets work.
view full answer... - Availability of a Slipper Spring with Radius End and 1,500LB Axle Capacity With a Length of 26" The only 1-3/4" wide slipper spring we are going to have with a radius end rated for 1,500lbs is the 3-Leaf Slipper Spring # e99SR you found. If you cannot find the correct size you may have to move your Hanger # CE14017G to use these shorter springs.
view full answer... - Installation Bolts for the CE Smith Hanger Bracket part # CE14017GThe mounting holes of the part # CE14017G and # CE140116G that you referenced are 7/16 inches in diameter. You would need to get bolts that would fit those hole sizes. Since applications can vary there isn't a set bolt size you would need. Your best option would be to find a bolt long enough for your application that would fit in the hole.
view full answer... - Is There a Bolt On Hanger Kit for Double Eye Leaf SpringsHey Ronnie, there is not a bolt on hanger kit for the 3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles # e57SR. All of the hangers like Single-Axle Trailer Hanger Kit for Double-Eye Springs # APS4 are going to be weld on. We do have bolt on hangers like # CE14016G and # CE14017G but they are designed for slipper springs not double eye springs.
view full answer... - Hanger Compatibility For Bolt-On Application On 2016 Tracker TrailerThe Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall - 9/16" Bolt Hole # E4139 is a weld on application. It hasn't been tested for bolt on installations, so I can't confirm it will hold up if you drilled it and bolted it in place. We have only 2 bolt-on hangers and they are for slipper springs, # CE14016G and # CE14017G.
view full answer... - Replacing Hangers with 3 Mounting Holes on a 1990 Escort Boat TrailerWe do have a few hangers with 3 holes in the top, like parts # CE14016G and # CE14017G, but they are for 1-3/4" wide slipper springs. The former is 2-1/4" tall while the latter is 1-3/4" tall. If these match your current hangers then look no further! These are for bolt-on installations but all of our other hanger options are weld-on applications. Otherwise you may be better off to choosing a different hanger from the linked selection and have it welded by a professional to your trailer....
view full answer... - Are Galvanized Leaf Spring Hangers AvailableIf your trailer uses slipper springs, we do offer galvanized hangers. They are part # CE14016G front hangers, and # CE14017G for rear hangers. We also carry some galvanized shackle links. You can check them out at the attached link.
view full answer... - Availability of Rear Slipper Spring Hanger for 1-3/4 inch Wide SpringFor a rear hanger designed for a 1-3/4 inch wide slipper spring we have the part # CE14017G. This hanger can be used with the slipper springs that have a flat rear side or if they have a hook style.
view full answer... - Availability of Rear Slipper Spring Hanger that Bolts on for 1-3/4 inch Wide SpringSounds like you are looking for the part # CE14017G. This is a bolt on rear slipper spring hanger that would work well for you. It's also for springs that are 1-3/4 inches wide.
view full answer...
Do you have a question about this Trailer Suspension Part?
Info for this part was:
Installed by:
Joe V
Installed by:
Jeff D
Video by:
Andrew K
Expert Research:
Jameson C
Written by:
David L
Updated by:
Wilson B
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
D G.
6/7/2018
The trailer axle and parts I purchased are working good. I had some modifications to make in my trailer springs but I knew that going in. The axle is much heavier in construction than the o.e.m axle so I should never have a problem with this one.