Replacement Tail Hinge for Extang Solid Fold 2.0 Hard Tonneau Cover on 2013 Ford F-150

Question

Question:

would this fit the EX83410 cover? I just bought the replacement rear panel but i need this as well. thanks!

asked by: Rob

0

Expert Reply:

The tail hinge you need is the Replacement Tail Hinge for Extang Solid Fold 2.0 Hard Tonneau Cover # EX83410-64B.

This is the correct fit for the Extang Solid Fold 2.0 Hard Tonneau Cover 83410 to go with the Replacement Tail Panel Assembly # EX83410-62C you bought.

expert reply by: Kyle S

0

Answer 1

The Replacement Tail Hinge #EX92FJ fits the Extang Solid Fold 2.0 Hard Tonneau Cover 83480. I do see this cover was for the 2015-2020 Ford F-150 with a 6-1/2' bed.

view full answer...

Answer 2

For your 2015 Ram 2500 with 8 foot bed, the replacement tail panel hinge assembly you need for your Extang 2.0 cover EX83435 is #EX83435-64.

view full answer...

Answer 3

Hey Bryan! The Replacement Tail Hinge Cap Kit item #EX35830020 uses a T-20 Torx bolt. If you could give me a part number off of your tonneau cover or let me know your vehicle's year/make/model and bed length, I would be happy to verify this is…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 11

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 12

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Replacement Tail Hinge for Extang Solid Fold 2.0 Hard Tonneau Cover on 2013 Ford F-150

Continue Researching