Replacement Tail Panel Hinge Assembly for Extang 2.0 on 2015 Ram 2500

Question

Question:

Which one do I order for a 2015 ram 2500 with an 8 foot bed. I broke the tail panel hinge assembly and need the whole hinge assembly like the last guy that posted

asked by: Brian M

0

Expert Reply:

For your 2015 Ram 2500 with 8 foot bed, the replacement tail panel hinge assembly you need for your Extang 2.0 cover EX83435 is # EX83435-64.

expert reply by: Jason S

0

Answer 1

Hey Scott, thanks for the information. You're going to need the Replacement Tail Hinge for Extang Solid Fold 2.0 Hard Tonneau Cover item #EX83430-64. This is the replacement designed for the Extang Solid Fold 2.0 covers that fit your 2017 Ram…

view full answer...

Answer 2

The replacement tail panel you need for the EX83430 is the part #EX83430-62, the tail hinge is part #EX83430-64, and then for replacement tail clamps you'd want the part #EX1035.

view full answer...

Answer 3

Hey Bryan! The Replacement Tail Hinge Cap Kit item #EX35830020 uses a T-20 Torx bolt. If you could give me a part number off of your tonneau cover or let me know your vehicle's year/make/model and bed length, I would be happy to verify this is…

view full answer...

Answer 4

The tail hinge you need is the Replacement Tail Hinge for Extang Solid Fold 2.0 Hard Tonneau Cover #EX83410-64B. This is the correct fit for the Extang Solid Fold 2.0 Hard Tonneau Cover 83410 to go with the Replacement Tail Panel Assembly…

view full answer...

Answer 5

The Replacement Tail Hinge #EX92FJ fits the Extang Solid Fold 2.0 Hard Tonneau Cover 83480. I do see this cover was for the 2015-2020 Ford F-150 with a 6-1/2' bed.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Replacement Tail Panel Hinge Assembly for Extang 2.0 on 2015 Ram 2500

Continue Researching