Does The Buyers Products Hitch Plate Fit Ford F550 Cab and Chassis

Question

Question:

Hi, Will this fit a 2001 Ford F550 XLT Dump Truck?

asked by: Rion A

0

Expert Reply:

Yes, the Buyers Products Hitch Plate part # 3371809060A fits the Ford 550 cab and chassis as long as the frame measures 34 inches wide.

expert reply by: Heather A

0

click to enlarge

Answer 1

I do have an option for you but we don't have any custom gooseneck hitches for a 1997 Ford F-250/F-350 Cab and Chassis. That said, what you can do is go with the B&W Turnoverball Underbed Gooseneck Trailer Hitch part #BWGNRK1500 and have it…

view full answer...

Answer 2

Yes we do; I have added a photo below for you of the dimensions of the Buyers Products Hitch Plate with 2" Receiver Tube - Ford #3371809060A.

view full answer...

Answer 3

The inner bracket width of the Buyers Products Hitch Plate with 2" Receiver Tube - Ford #3371809060A is 34-1/4" plus or minus 0.06" according to my contact at Buyers Products. Attached is a photo showing this dimension for you.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Does The Buyers Products Hitch Plate Fit Ford F550 Cab and Chassis

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching