Will the Coil SumoSprings Custom Helper Springs CSS-1145R Fit a 2012 Toyota Highlander Hybrid

Question

Question:

Why CSS-1145R does fit on Toyota Highlander 2012 but can not be used on 2012 hybrid highlander ? its the same suspension.

asked by: Steve D

1

Helpful Expert Reply:

I spoke with Super Springs about the Coil SumoSprings Custom Helper Springs part # CSS-1145R for your 2012 Toyota Highlander Hybrid. The issue is not that it is not a fit but rather they have not yet had a Hybrid model in to test them on. If you are sure they are the same suspension then they will work for you but in order to be certain I would need you to take the measurements I have attached for you so I can confirm compatibility.

expert reply by: Conner L

1

click to enlarge

Answer 1

You have nothing to worry about! According to SeaSucker, all of their products like the SeaSucker Monkey Bars Roof Rack #298-SX6000B that you have for your 2008 GMC Canyon are compatible with fiberglass surfaces. Along with fiberglass surfaces, their…

view full answer...

Answer 2

Both the Draw-Tite Class III Trailer Hitch #76046 and the Curt Class III #C13383, which are confirmed to fit your 2018 Chrysler Pacifica, will require that the heat shield is trimmed/modified for proper installation. In both cases the heat shield…

view full answer...

Answer 3

The SumoSprings kit part #CSS-1145R is exactly what you are looking for. This will give the rear suspension of your 2021 Toyota Highlander additional support to get rid of the sagging you mentioned. You are right that a weight distribution system…

view full answer...

Answer 4

Hey there Barry, thanks for writing in, and I double-checked with the manufacturer and can verify for you the correct Coil SumoSprings for your 2018 Toyota Highlander 4WD (so long as it is not the hybrid version) are the 1145: - Coil SumoSprings…

view full answer...

Answer 5

The difference between the Coil SumoSprings Custom Helper Springs for Coil Spring Suspension part #CSS-1145R and part #CSS-1168R is that the CSS-1145R is designed for 4 wheel drive models and the CSS-1168R kit is designed for 2 wheel drive models.…

view full answer...

Answer 6

Hey Jonathan, We haven't heard of any issues with the P3 #90195 and plug-in harness #3070-P with a 2024 Honda Ridgeline. How are you sure that the brakes are being applied on your Honda when applying the manual override on the P3? What are you…

view full answer...

Answer 7

Hello again Pete; you have the right idea looking at the Air Lift 1000 Universal Air Spring Kit #AL57TV. There are no custom fit options for your 2022 Toyota Highlander XLE so the only solution is one of these universal kits. To find the right one…

view full answer...

Answer 8

We have two rear-axle suspension kits for the 2013 Toyota Highlander and one works with the 2- and the other with the 4-wheel-drive models. However, these kits are not air-bag types, but rather a micro-cellular polyurethane foam helper spring that…

view full answer...

Answer 9

The only suspension enhancement confirmed to fit your 2017 Hyundai Santa Fe Limited is the Coil SumoSprings Custom Helper Springs #CSS-1145R. These provide support to the coil springs on your vehicle. For air springs like the #F4155 you looked at,…

view full answer...

Answer 10

That's definitely some sag! As a first step, I'd look over the instructions for the weight distribution system you're using to ensure that the system is set up properly. If I had a dollar for everybody that's told us that there was no…

view full answer...

Answer 11

Yes, the Firestone Coil-to-Air-Spring Conversion Kit part #F2595 is going to help take the sag out of your 2012 Ram 1500 while hitched to your boat trailer. This system will actually replace the leaf springs on the truck with a set of air springs. I…

view full answer...

Will the Coil SumoSprings Custom Helper Springs CSS-1145R Fit a 2012 Toyota Highlander Hybrid

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching