Recommended Weight Distribution System for Trailer with 7,890 Pound GVWR
Updated 05/17/2019 | Published 05/16/2019
Products Featured in This Question
Question:
Trailer gvwr is 7890. Should I go with the Curt TruTrack 17500 or 17499?
asked by: Kenny S
Expert Reply:
Between the two Curt TruTrack weight distribution systems you mentioned I definitely recommend going with the higher rated # C17500.
A trailer's tongue weight should be 10 to 15 percent of its total weight which means we can estimate a loaded tongue weight on your 7,890 pound trailer to be around 789 to 1,183 pounds. The Curt TruTrack # C17500 features a tongue weight capacity range of 800 to 1,000 pounds which much better matches your potential range than the 500 to 800 pound capacity on the # C17499 that you also referenced.
You will get the most benefits out of a weight distribution system when your total tongue weight falls comfortably within the system's capacity range. Keep in mind too that your total tongue weight includes both the loaded tongue weight of the trailer along with any added cargo weight coming from behind the rear axle of your tow vehicle.
If you find that your total tongue weight will exceed the 1,000 pound limit on the recommended TruTrack then I recommend looking at the Equal-i-zer # EQ37120ET instead. This is an excellent system that features an 800 to 1,200 pound tongue weight capacity range, integrated 4-Point Sway Control to drastically limit any side-to-side movement, and clamp-on brackets that eliminate the need to drill into your trailer's frame. I do just recommend adding the Thin Walled Socket # ALL643216 to help with installation.
I have attached a couple short video demonstrations on these systems that you can check out along with an article you might find helpful.
Product Page this Question was Asked From
Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Trunnion Bar
- Fits 3 Inch Frame
- Fits 4 Inch Frame
- Fits 5 Inch Frame
- Fits 6 Inch Frame
- Includes Shank
- Top-Mount
- Fits 2 Inch Hitch
- Allows Backing Up
- 900 lbs
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: grand design imagine xls travel trailer
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Determining Trailer Tongue Weight
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Shop: Towing Mirrors
- Shop: Curt Weight Distribution Shank for 2" Hitches - 7-3/8" Drop - 11-1/2" Rise
- Shop: CIPA Custom Towing Mirror - Slip On - Passenger Side
- Shop: Equal-i-zer High-Performance Lubricant - 4 oz
- Shop: K-Source Snap & Zap Custom Towing Mirrors - Snap On - Driver and Passenger Side
- Shop: CIPA Custom Towing Mirrors - Slip On - Driver Side and Passenger Side
- Q&A: Which is Better Round Bar Weight Distribution or Trunnion Head
- Q&A: Weight Distribution Recommendation for Trailer with Loaded Tongue Weight of 700 lb
- Q&A: Recommended Weight Distribution System for a 7,500 lbs Camper
- Q&A: Which Curt TruTrack Weight Distribution/Sway Control System for Trailer With 755lb Dry Tongue Weight
- Q&A: Best Weight Distribution Hitch For 2020 Grand Design Transcend Xplor 265BH Travel Trailer
- Q&A: Which Curt TruTrack Weight Distribution System is Best for a 2019 Keystone Passport GT 2210RB
- Q&A: Recommended Suspension Enhancement for a 2020 Chevy Silverado 1500
- Shop: Curt Trunnion Style Weight Distribution System with Shank - 10,000 lbs GTW, 1,000 lbs TW
- Shop: Curt Welded Weight Distribution Shank 7" - 10 Hole Adjustment